Murray 405000x8E manual HOW to Remove the Mower Housing, HOW to Install the Mower Housing

Page 27

MAINTENANCE

HOW TO REMOVE THE MOWER HOUSING

1.Move the blade rotation control to the DISENGAGE position.

2.Move the lift lever to the level adjustment position (Figure 22).

HOW TO INSTALL THE MOWER HOUSING

1.

Push the mower housing under the right side of the unit.

2.

Put the mower drive belt around the stack pulley. Make sure

WARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUST- MENT position.

3.Remove the hair pins and the washers from the adjuster arms (Figure 23). See illustra- tions “C” and “D”.

4.Remove the hair pins and wash- ers from the suspension links. See illustrations “A” and “B”.

Level Adjustment

 

Position

Figure 22

 

the “V” side of the mower drive belt is against the stack pulley.

 

Also, make sure the mower drive belt is not twisted.

3.

Attach the front hanger to the axle support with the hanger

 

rod. Fasten with the fasteners as shown. See illustration “F”.

4.

Make sure the mower drive belt is between the stack pulley

 

and the two belt guides. See illustration “G”.

5.

Attach the suspension links to the lifter assembly. Fasten

 

with the washers and hair pins. See illustrations “A” and “B”.

6.

Attach the right and the left adjuster arms to the suspension

 

brackets. Fasten with the washers and hair pins. See illustra-

 

tions “C” and “D”.

5.Disconnect the extension spring from the blade control rod. See illustration “E”.

6.Disconnect the front hanger from the axle support. See illustration “F”.

7.Remove the mower drive belt from the stack pulley.

8.Pull the mower housing away from the right side of the unit.

9.To operate without the mower housing, move the lift lever to the TOP position.

7.

Attach the extension spring to the blade control rod. See

 

illustration “E”.

8.

Move the blade rotation control to the ENGAGE position.

 

Make sure the mower drive belt is inside all the belt guides.

9.

Make sure the mower housing is level. See the instructions on

 

“How To Level The Mower Housing”.

10.

Check the operation of the blade rotation control. See the in-

 

structions on “How To Adjust The Blade Rotation Control”.

 

Lift Lever

 

 

 

 

 

Stack Pulley

Suspension

 

 

 

Link

Blade Rotation

 

 

 

 

 

 

Control

 

 

 

 

Belt

Belt

 

 

Guide

 

 

Guide

 

 

 

 

 

 

Mower Drive Belt

Lifter

 

 

 

Assembly

 

 

 

 

 

 

Adjuster Arm

Suspension

 

 

Blade

Link

 

 

Control Rod

Adjuster

 

 

 

Arm

 

 

 

 

 

 

Extension

 

 

 

Spring

 

Mower Drive Belt

Front Hanger

 

Hanger Rod

Figure 23

F-050700L

27

 

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model Table of Contents Responsibility of the Owner OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials International PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the SeatMaintenance Free Battery HOW to Charge Maintenance Free BatteryHOW to Install the Battery Cables Check the Tires HOW to Prepare the EngineCheck the Level of the Mower Housing IMPORTANT! Before YOU Start MowingOperation Location of ControlsLift Lever Attachments Electrical Safety SystemHOW to Operate the Ignition KEY Switch HOW to USE the Throttle ControlHOW to USE the Shift Lever HOW to USE Blade Rotation ControlHOW to Transport the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Stop the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingHOW to Start the Engine Before Starting the EngineCarburetor Mowing and Bagging Tips Operating TipsGeneral Recommendations MaintenanceMaintenance Chart HOW to Check the MufflerHOW to Remove and Install the Blade HOW to Sharpen the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the ClutchDisconnect the adjuster nut from the shifter bracket Figure HOW to Adjust the Shift LeverHOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Level the Mower Housing Removal HOW to Replace Motion Drive BeltInstallation HOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsBattery HOW to Replace the FuseHOW to Replace the Light Bulb HOW to Clean the Mower HousingProblem The engine will not start Trouble Shooting ChartMURRAY, INC. Lawn Mower Central Parts Distributors Chassis & Hood Repair PartsKey Description Motion Drive Motion Drive Steering Steering Mower Housing Suspension Repair Parts Mower Housing Includes Key No , 18, 30, 31, 32, 33, 45, 46, 47 Repair Parts Engine Mount Engine Mount Wiring Harness for Electrical System 050700L Index Lawn Tractor Accessories

405000x8E specifications

The Murray 405000x8E is an innovative product that has garnered significant attention in various industries due to its advanced features, technologies, and user-friendly characteristics. Designed for efficiency and performance, the 405000x8E combines cutting-edge engineering with practical applications, making it a valuable asset for professionals seeking reliable solutions.

One of the main features of the Murray 405000x8E is its robust construction, which ensures durability and longevity even in demanding environments. This product is built with high-quality materials that can withstand harsh conditions, making it suitable for a range of applications from industrial to commercial use. Users appreciate the reliable performance that the 405000x8E consistently delivers over time.

In terms of technology, the Murray 405000x8E incorporates state-of-the-art components that enhance its functionality. It features a powerful processing unit that allows for quick data handling and processing, contributing to increased productivity. The integration of smart technology enables real-time monitoring and adjustments, providing users with greater control and flexibility. This smart technology aspect is particularly advantageous for industries that require precise data analysis and quick decision-making.

Another notable characteristic of the Murray 405000x8E is its energy efficiency. Designed with sustainability in mind, this product minimizes energy consumption without compromising on performance. The incorporation of energy-efficient technologies not only reduces operating costs but also supports eco-friendly practices, making it an attractive choice for environmentally conscious users.

User-friendliness is a core element of the Murray 405000x8E. The intuitive interface ensures that operators can quickly familiarize themselves with the system, reducing the learning curve and minimizing the potential for operational errors. Additionally, the product is designed for easy maintenance, with accessible components that simplify troubleshooting and repairs, ultimately leading to reduced downtime.

Overall, the Murray 405000x8E stands out in the market for its combination of durability, advanced technology, energy efficiency, and user-centric design. Whether for industrial applications, commercial ventures, or any other demanding fields, the 405000x8E is a reliable solution that meets the diverse needs of its users. As industries continue to evolve, products like the Murray 405000x8E will play a pivotal role in shaping efficient and sustainable operations.
Top Page Image Contents