Weed Eater TE12, TE35, 530084129 instruction manual Replacing the Line, Tap button, Missile

Page 6

REPLACING THE LINE

SDisconnect unit from the power source. S Remove the spool by firmly pulling on

the tap button.

S Clean entire surface of hub and spool. S Replace with a pre-wound spool, or cut a length of 30 feet of 0.065 diameter Weed Eaterr brand line. Use of heavier line could overload and damage the unit. Never use wire, rope, string, etc., which can break off and become a dangerous

missile.

S Insert one end of the line about 1/2 inch (1 cm) into the small slot inside the spool.

Small

Hole

Spool

S Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

SPush the line into the notch, leaving 3

to 5 inches (7 -- 12 cm) unwound.

S Insert the line into the exit hole in the hub as shown in the illustration.

Line in

Notch

Hub

Line exit hole

 

SAlign the notch with the line exit hole. S Push the spool into the hub until it snaps into place, while keeping light

tension on the end of the line.

S Pull on the line extending outside of the hub to release it from the notch; other- wise, the unit will not function properly.

WARNING: Perform the following steps after each use.

SStop the unit and disconnect the power

source when not in use.

SCarry the unit with motor stopped.

S Store the unit so the line limiter blade cannot cause injury.

S Store unit and extension cord indoors in a high, dry place out of the reach of children. Store unit unplugged.

SStore unit with all guards in place. Posi- tion unit so that any sharp object can- not accidentally cause injury.

For assistance, or a replacement part call: 1-800-554-6723.

Safety Glasses

952701645

Spool with 30’ line

952701663

50’ coil of bulk line. 952701550

100’ coil of line.

952701533

200’ coil of line.

952701594

6

Image 6
Contents SG / TE / XT Series Operator Safety Electrical SafetyMaintenance Safety Unit SafetyCutting Safety Transporting and StorageSelect AN Extension Cord Align Installation ArrowsExtension Cord Gauge Chart Length of Cord Attach the Extension Cord to Your TrimmerCorrect Operating Position Adjusting Upper HandleInspect and Clean Unit and LA- Bels Advancing the Cutting LineReplacing the Line Tap buttonMissile Troubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC Policy of Electrolux Home

530084129, TE35, TE12 specifications

When it comes to tackling overgrown lawns and gardens, few tools stand out quite like the Weed Eater lineup, particularly the TE12 and TE35 models, alongside parts like the 530084129 attachment. These electric trimmers are designed for efficiency, usability, and durability, making them indispensable for homeowners and landscaping professionals alike.

Starting with the TE12, this model is lightweight and user-friendly, with an ergonomic design that allows for extended use without causing fatigue. Weighing in at approximately 4.6 pounds, it is easy to maneuver, making it ideal for reaching tight spaces, corners, and steep areas in your yard. The TE12 features a corded electric design, which means you can rely on consistent power without the worry of battery life. Its 12-inch cutting width enables efficient trimming of grass and weeds, allowing users to complete tasks quickly.

Transitioning to the TE35, this trimmer elevates performance with a more powerful motor designed for tougher jobs. With a cutting width of 14 inches, it allows for greater coverage in shorter time frames. The TE35 also integrates a simple line-feed system, making it easy to replace trimmer line without complicated processes. Additionally, its adjustable handle offers better control and comfort, accommodating users of different heights and preferences.

The impact of the 530084129 attachment cannot be overlooked. This specific part enhances the usability of Weed Eater products, providing options for different types of cutting tasks. The versatility of this attachment means users can switch from basic trimming to more detailed edging or even heavier-duty cutting with ease.

Both models utilize advanced motor technology, ensuring efficient operation. The maintenance on these trimmers is minimal, thanks to easy-access features that prevent clogging and simplify cleaning processes.

In summary, the Weed Eater TE12 and TE35, along with the 530084129 attachment, encapsulate the perfect blend of power, efficiency, and versatility. These models are thoughtfully engineered for both novice users and professional landscapers, making yard maintenance a simpler and more enjoyable task. Whether you are tidying up your garden or maintaining expansive lawns, the Weed Eater series stands out as a reliable choice for all your trimming needs.