Weed Eater 545186797, SST25C Shaft Assembly, Adjusting the Handle, Attaching Shield

Page 5

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

SHAFT ASSEMBLY

CAUTION: When assembling shaft, place the unit on a flat surface for stability.

1.Align grooves on upper and lower shafts.

Upper Shaft

Grooves

Lower Shaft

2.Push the two shafts together until the lower shaft is fully seated in the upper shaft (the shafts lock into place).

NOTE: If locking sleeve assembly will not tighten, the shafts are not fully seated.

ADJUSTING THE HANDLE

WARNING: When adjusting the assist handle, be sure it remains above the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an upright position; retighten wing nut.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Shield

Bracket

Slot

3.Slide lower locking sleeve assembly over upper locking sleeve assembly and tight- en by turning clockwise.

Upper Locking

Sleeve Assembly

Lower Locking

Sleeve Assembly

Wing Nut

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageShaft Assembly AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitFuel Requirements Starting a Warm EngineCutting Methods Starting a Flooded EngineOperating Position Maintenance Line Replacement Service and AdjustmentsCarburetor Idle Speed Adjustment Replace Spark PlugFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186797, SST25C specifications

The Weed Eater SST25C, model number 545186797, is a versatile and reliable trimmer designed for demanding yard work. This gas-powered string trimmer combines affordability, lightweight construction, and user-friendly features, making it a preferred choice for homeowners and gardening enthusiasts alike.

One of the standout features of the SST25C is its 25cc two-stroke engine, which delivers ample power for various trimming tasks. This engine is designed for efficiency, providing a good balance between performance and fuel consumption. Users can expect to complete lawn care tasks without worrying excessively about refueling.

The SST25C employs a flexible bend shaft, which enhances maneuverability around flower beds, fences, and other obstacles in the yard. This design is particularly beneficial for reaching tight spaces where traditional straight shaft trimmers may struggle. The lightweight frame further adds to its ease of use, reducing fatigue during longer trimming sessions.

In terms of cutting technology, the Weed Eater SST25C features a dual line feed head. This system allows for quicker and smoother line advancement, helping the trimmer achieve clean cuts and efficient trimming. The ability to easily replace the cutting line means minimal downtime, ensuring that users can get back to work swiftly.

Ergonomics play a crucial role in the design of the SST25C. It comes equipped with a comfortable handle that provides a firm grip, allowing for extended use without discomfort. The controlled throttle response ensures that users can easily adjust the power to their need, while the lightweight structure minimizes strain on the arms and back.

Additionally, the SST25C has a simple starting mechanism, which many users appreciate. Its design incorporates a straightforward pull cord system that minimizes effort during startup, making it accessible even for those who may not be mechanically inclined.

Overall, the Weed Eater SST25C, 545186797, is an excellent choice for those looking to maintain their lawns with efficiency and ease. Combining power, lightweight construction, and ergonomic design, this trimmer stands out as a reliable tool for tackling any trimming job. Whether it's edging around sidewalks or clearing tough weeds, the SST25C promises to deliver superior performance and satisfaction.
Top Page Image Contents