Weed Eater 545186797, SST25C instruction manual Maintenance

Page 9

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, WEED EATER may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SSTOP Switch -- Ensure STOP switch func- tions properly by pushing and holding the

switch in the STOP position. Make sure en- gine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the air filter cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is opened.

2. Open air filter cover by pushing button (see illustration). Remove air filter.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace air filter and close cover.

Button

Air Filter

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, however, the muffler and spark arresting screen will not re- quire any service.

After 50 hours of use, we recommend that your muffler be serviced or replaced by your authorized service dealer.

9

Image 9
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageShaft Assembly AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitFuel Requirements Starting a Warm EngineStarting a Flooded Engine Operating PositionCutting Methods Maintenance Line Replacement Service and AdjustmentsCarburetor Idle Speed Adjustment Replace Spark PlugFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186797, SST25C specifications

The Weed Eater SST25C, model number 545186797, is a versatile and reliable trimmer designed for demanding yard work. This gas-powered string trimmer combines affordability, lightweight construction, and user-friendly features, making it a preferred choice for homeowners and gardening enthusiasts alike.

One of the standout features of the SST25C is its 25cc two-stroke engine, which delivers ample power for various trimming tasks. This engine is designed for efficiency, providing a good balance between performance and fuel consumption. Users can expect to complete lawn care tasks without worrying excessively about refueling.

The SST25C employs a flexible bend shaft, which enhances maneuverability around flower beds, fences, and other obstacles in the yard. This design is particularly beneficial for reaching tight spaces where traditional straight shaft trimmers may struggle. The lightweight frame further adds to its ease of use, reducing fatigue during longer trimming sessions.

In terms of cutting technology, the Weed Eater SST25C features a dual line feed head. This system allows for quicker and smoother line advancement, helping the trimmer achieve clean cuts and efficient trimming. The ability to easily replace the cutting line means minimal downtime, ensuring that users can get back to work swiftly.

Ergonomics play a crucial role in the design of the SST25C. It comes equipped with a comfortable handle that provides a firm grip, allowing for extended use without discomfort. The controlled throttle response ensures that users can easily adjust the power to their need, while the lightweight structure minimizes strain on the arms and back.

Additionally, the SST25C has a simple starting mechanism, which many users appreciate. Its design incorporates a straightforward pull cord system that minimizes effort during startup, making it accessible even for those who may not be mechanically inclined.

Overall, the Weed Eater SST25C, 545186797, is an excellent choice for those looking to maintain their lawns with efficiency and ease. Combining power, lightweight construction, and ergonomic design, this trimmer stands out as a reliable tool for tackling any trimming job. Whether it's edging around sidewalks or clearing tough weeds, the SST25C promises to deliver superior performance and satisfaction.