Weed Eater RT10, 530086306 manual Replacing the Line, Accessories Available

Page 6

REPLACING THE LINE

S Disconnect unit from the power source.

SRemove the spool by firmly pulling on the tap button.

SClean entire surface of hub and spool. S Replace with a pre-wound spool or cut a length of 30 feet of 0.065 inch (1.65 mm) diameter Weed Eaterr brand line. Use of heavier lines could

overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and be- come a dangerous missile.

S Insert one end of the line about 1/2 inch (1 cm) into the small hole inside the spool.

Small

Hole

Spool

Tap

Button

S Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

SPush the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

SInsert the line into the exit hole in the hub as shown in the illustration.

Line in Notch

Hub

Line exit hole

 

SAlign the notch with the line exit hole. S Push the spool into the hub until it

snaps into place.

S Pull on the line extending outside the hub to release it from the notch; other- wise, the unit will not function properly.

WARNING: Perform the following steps after each use.

SStop the unit and disconnect the pow- er source when not in use.

SCarry the unit with motor stopped.

SStore the unit so the line limiter blade cannot cause injury.

SStore unit and extension cord indoors in a high, dry place out of the reach of

children. Store unit unplugged.

S Store unit with all guards in place. Position unit so that any sharp object cannot accidentally cause injury.

For assistance or a replacement part, call 1--800--554--6723.

ACCESSORIES AVAILABLE

Safety Glasses

952701645

Spool with 30! line

952701663

50! coil of bulk line

952701550

100! coil of bulk line

952701533

200! coil of bulk line

952701594

6

Image 6
Contents Advertencia AvertissementOperator Safety Electrical SafetyMaintenance Safety Unit SafetyCutting Safety Transporting and StorageDouble Insulation Construction Adjusting Assist HandleAlign Installation Arrows Attaching the ShieldBefore Each USE After Each USEAccessories Available Replacing the LineTroubleshooting Table Cause Remedy Products North America

530086306, RT10 specifications

The Weed Eater RT10, model number 530086306, stands out as a reliable and efficient tool designed for grass trimming and landscaping needs. This versatile trimmer boasts a host of features aimed at maximizing user comfort and cutting performance, making it a popular choice among homeowners and gardening enthusiasts.

One of the notable features of the RT10 is its lightweight design. Weighing in at just over nine pounds, this trimmer allows for easy maneuverability, helping users to reach tight spots and maintain longer trimming sessions without excessive fatigue. The balanced weight distribution of the tool enhances control, ensuring that even novice users can handle it with confidence.

Equipped with a powerful gas engine, the RT10 delivers robust cutting performance. The engine’s design provides ample torque, allowing the trimmer to slice through thick grass and weeds effortlessly. Users appreciate the quick starting capabilities, thanks to its advanced recoil starting system. The engine’s efficiency contributes to longer run times, enabling users to complete their tasks without frequent refueling breaks.

The RT10 also features an adjustable cutting width, allowing users to customize their mowing experience based on the specific lawn conditions. With a cutting width of 10 inches, the trimmer can tackle various tasks, from edging to light mowing. The adjustable handle ensures user comfort during operation, accommodating different heights and grip preferences.

This model uses a dual-line cutting system, which significantly improves its cutting efficiency. The twin lines work in conjunction to provide a clean and precise cut, ensuring a well-maintained lawn. Moreover, the easy-to-reload spool system simplifies line replacement, keeping interruptions to a minimum.

For enhanced safety, the Weed Eater RT10 is designed with several features, including a protective shield that directs debris away from the user. This thoughtful design minimizes the risks associated with flying debris, allowing users to work with confidence.

In summary, the Weed Eater RT10,530086306 is a well-rounded trimmer that combines power, comfort, and safety. Its lightweight build, efficient gas engine, adjustable cutting width, and dual-line system make it an essential tool for anyone looking to maintain their garden effortlessly. Whether you are dealing with thick overgrowth or simply tidying up your lawn edges, the RT10 is built to handle a variety of trimming tasks effectively.