Weed Eater 530086306, RT10 manual Troubleshooting Table Cause Remedy

Page 7

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that re- quire unit to be operating.

TROUBLE

CAUSE

REMEDY

Trimmer head

1.

Crowding trimmer line

1.

Allow tip of line to do the cutting.

stops under a

 

against material being

 

 

load or does not

 

cut.

2.

Contact your authorized service dealer.

turn when switch

2.

Electrical failure.

is pressed.

3.

Thrown circuit breaker.

3.

Check breaker box.

 

4.

Debris stopping head.

4.

Remove debris.

 

 

 

 

 

Line does not

1.

Line improperly routed

1.

Check line routing.

advance or

 

in head.

 

 

breaks while

2.

Line improperly

2.

Rewind line tightly and evenly.

cutting.

 

wound into spool.

3.

Use only 0.065 inch (1.65 mm) dia. line.

 

3.

Incorrect line size

 

4.

Not enough line

4.

Remove cover and pull 4 inches

 

 

outside of head.

 

(10 cm) of line out of head.

 

5.

Dirt buildup on unit.

5.

Clean unit.

Line welds onto

1.

Line size is incorrect.

1. Use only 0.065 inch (1.65 mm) dia. line.

spool.

2.

Incorrect spool.

2. Replace with correct spool.

 

3.

Line is being crowded

3. Cut with tip of line fully extended.

 

 

against material being

 

 

 

 

cut.

 

 

Line releases

1.

Line improperly

1. Check line routing.

continuously.

 

routed in head.

 

 

 

2.

Spool damaged.

2. Replace spool.

 

 

 

 

Line usage is

1.

Line improperly routed

1. Check line routing.

excessive.

2.

in head.

2. Replace spool.

 

Line size is incorrect.

 

3.

Crowding line against

3. Cut with tip of line fully extended.

 

 

material being cut.

4. Replace spool.

 

4.

Spool worn or damaged.

 

 

 

Line pulls back

1. Too little line outside

1. Remove cover and pull 4 inches

into head.

 

of head.

 

(10 cm) of line outside of head.

 

2. Line size incorrect.

2. Use only 0.065 inch (1.65 mm) dia. line.

7

Image 7
Contents Avertissement AdvertenciaElectrical Safety Operator SafetyTransporting and Storage Unit SafetyCutting Safety Maintenance SafetyAttaching the Shield Adjusting Assist HandleAlign Installation Arrows Double Insulation ConstructionAfter Each USE Before Each USEReplacing the Line Accessories AvailableTroubleshooting Table Cause Remedy Products North America

530086306, RT10 specifications

The Weed Eater RT10, model number 530086306, stands out as a reliable and efficient tool designed for grass trimming and landscaping needs. This versatile trimmer boasts a host of features aimed at maximizing user comfort and cutting performance, making it a popular choice among homeowners and gardening enthusiasts.

One of the notable features of the RT10 is its lightweight design. Weighing in at just over nine pounds, this trimmer allows for easy maneuverability, helping users to reach tight spots and maintain longer trimming sessions without excessive fatigue. The balanced weight distribution of the tool enhances control, ensuring that even novice users can handle it with confidence.

Equipped with a powerful gas engine, the RT10 delivers robust cutting performance. The engine’s design provides ample torque, allowing the trimmer to slice through thick grass and weeds effortlessly. Users appreciate the quick starting capabilities, thanks to its advanced recoil starting system. The engine’s efficiency contributes to longer run times, enabling users to complete their tasks without frequent refueling breaks.

The RT10 also features an adjustable cutting width, allowing users to customize their mowing experience based on the specific lawn conditions. With a cutting width of 10 inches, the trimmer can tackle various tasks, from edging to light mowing. The adjustable handle ensures user comfort during operation, accommodating different heights and grip preferences.

This model uses a dual-line cutting system, which significantly improves its cutting efficiency. The twin lines work in conjunction to provide a clean and precise cut, ensuring a well-maintained lawn. Moreover, the easy-to-reload spool system simplifies line replacement, keeping interruptions to a minimum.

For enhanced safety, the Weed Eater RT10 is designed with several features, including a protective shield that directs debris away from the user. This thoughtful design minimizes the risks associated with flying debris, allowing users to work with confidence.

In summary, the Weed Eater RT10,530086306 is a well-rounded trimmer that combines power, comfort, and safety. Its lightweight build, efficient gas engine, adjustable cutting width, and dual-line system make it an essential tool for anyone looking to maintain their garden effortlessly. Whether you are dealing with thick overgrowth or simply tidying up your lawn edges, the RT10 is built to handle a variety of trimming tasks effectively.