10.Place spool into hub with cut out area of spool in line with eyelets (see illustration).
Cut out
area of spool
Eyelet
11.Remove one line from notch and feed line through eyelet. Repeat for second line.
12.Reinstall the spool cap.
USER REPLACEABLE SERVICE PARTS
REPLACEMENT PART |
| PART NUMBER |
Spool with 0.065″ Trimmer Line |
| 545124402 |
Spool Cap |
| 545124417 |
|
| |
| STORAGE | |
|
|
|
WARNING: Perform the following steps after each use.
S Stop the unit and disconnect the power source when not in use.
SCarry the unit with motor stopped.
SStore the unit so the line limiter blade can- not cause injury.
SStore unit and extension cord indoors in a high, dry place out of the reach of children.
Store unit unplugged.
SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.
10