Motor Housing | Shield |
|
Cutting Head CAUTION: Sharp line limiter blade
2.Twist the shield as illustrated until it snaps securely into place. Make sure the shield is assembled to the unit as shown in the illustration below and in the KNOW YOUR TRIMMER section of this manual.
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
| Trigger Switch |
Upper |
|
Shaft | Power Cord |
|
Lower |
|
Shaft | Debris Shield |
| |
| Instruction Manual |
Motor | Line Limiter Blade |
Housing |
|
| Trimmer |
| Head |
POWER CORD
The POWER CORD is where you attach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch to operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting line to the proper cutting length.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and rotates during operation.
6