Carburetor Adjustment, Seasonal Storage, Engine

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed

Screw

Air Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area

where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

530163512, FL25 specifications

The Weed Eater 530163512 FL25 is a versatile and robust string trimmer designed for both casual gardeners and experienced landscapers. This model is well-regarded for its blend of power, efficiency, and user-friendly features that make yard maintenance a breeze.

One of the standout features of the FL25 is its 25cc, 2-cycle engine. This engine is engineered to deliver sufficient power for tackling tough weeds and grass while maintaining a compact size. The powerful motor not only aids in efficient trimming but also ensures that users can handle larger areas with less effort. The engine is designed for easy starting, reducing the frustration often associated with small engine equipment.

The FL25 boasts a dual-line trimmer head, which allows for a wider cutting path compared to single-line models. This feature enhances productivity by trimming more grass in a single pass. The trimmer head is also equipped with an automatic bump feed system, enabling users to advance the line without stopping the engine. This convenience means less downtime and a smoother trimming experience.

Another notable characteristic of the Weed Eater 530163512 is its lightweight construction. Weighing in at just under 10 pounds, it is designed for ease of maneuverability without sacrificing durability. The comfortable, cushioned grip handle helps reduce vibration, allowing for extended use without causing hand fatigue.

The FL25 is engineered with a split shaft design, which allows for easy storage and transport. This feature also enables users to attach various accessories, making this trimmer a versatile tool in any gardener's arsenal.

In terms of technologies, the Weed Eater FL25 incorporates a low-emission engine, which contributes to a cleaner environment by minimizing harmful exhaust output. This aligns with modern standards for environmental responsibility and user health.

Overall, the Weed Eater 530163512 FL25 stands out as a reliable, efficient, and convenient string trimmer. Its combination of a powerful engine, dual-line capability, and ergonomic design makes it a top choice for anyone looking to maintain a well-kept yard. Whether tackling overgrown grasses or edging along pathways, the FL25 is engineered to deliver excellent results every time.