HOW to Stop Your Unit, HOW to Start Your Unit

HOW TO STOP YOUR UNIT

To stop the engine, push and release the engine STOP switch. The switch will automatically return to the ON position. Wait 5 seconds before attempting to restart unit to allow switch to reset.

HOW TO START YOUR UNIT

Starting Position

Choke Lever
Trigger
Primer Bulb	Muffler

WARNING: The trimmer head will turn while starting the engine. Avoid any contact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

SSet unit on a flat surface.

SSlowly press the primer bulb 6 times.

SMove choke lever to FULL CHOKE position. S Squeeze the throttle trigger fully and hold

through all remaining steps.

S Pull starter rope handle sharply 6 times. S Move choke lever to HALF CHOKE position. S Pull starter rope handle no more than 6

pulls, until engine runs.

S Allow engine to run 10 seconds, then move choke lever to OFF CHOKE position.

STARTING A WARM ENGINE

SMove choke lever to OFF CHOKE position. S Pull starter rope handle until engine runs. S If engine does not start in 5 pulls, follow instructions in STARTING A COLD ENGINE.

It is recommended that the engine not be operated for longer than 1 minute at full throttle.

OPERATING POSITION

ALWAYS WEAR:										Eye
ALWAYS WEAR:										Eye
										Protection



Long Pants







Heavy Shoes

Cut from your right to your left.

ADVANCING THE CUTTING LINE

Advance line by tapping the bottom of the cutting head lightly on the ground while engine is running at full speed. A metal blade attached to the shield will cut the line to the proper length.

REPLACING THE LINE

S Remove spool by firmly pulling on tap button.

SClean entire surface of hub and spool.

S Replace with pre--wound spool, or cut a length of 20 feet of 0.080” (2 mm) diameter Weed Eater! brand line. Never use wire, rope, string, etc., which can break off and become a dangerous missile.

SInsert one end of line about 1/2 inch (1 cm) into the small hole on the inside of the spool.

Small

HoleSpool

Line in Notch

Hub

Line exit hole

S Wind line evenly and tightly onto spool. Wind in the direction of the arrow on the spool.

SPush the line into the notch, leaving 3 to 5

inches ( 7 -- 12 cm) unwound.

SInsert the line into the exit hole in the hub as shown in the illustration.

SAlign the notch with the line exit hole.

SPush spool into hub until it snaps into place. S Pull the line extending outside of the hub to

release it from the notch.

530086308, FL21 LE specifications

The Weed Eater FL21 LE, model number 530086308, is a versatile and efficient string trimmer designed to simplify lawn maintenance. Built for homeowners and garden enthusiasts alike, it brings together power, ease of use, and innovative technologies to help achieve a pristine yard with minimal effort.

One of the standout features of the FL21 LE is its lightweight design, making it easy to maneuver around gardens and landscapes. Weighing in at just under 10 pounds, it is particularly appealing for those who may struggle with heavier equipment. This trimmer is fitted with a 21cc two-stroke engine, delivering sufficient power to cut through overgrown grass and weeds with ease. The robust engine ensures that users can tackle tough jobs without feeling overwhelmed.

Ergonomics play a crucial role in the design of the FL21 LE. It comes equipped with an adjustable handle that allows users to customize their grip for comfort, reducing fatigue during extended periods of use. The dual-line cutting system enhances efficiency by allowing a wider cutting path, which means fewer passes over the same area. As a result, users can complete their trimming tasks in less time.

The Weed Eater FL21 LE also features easy-start technology, which reduces the hassle commonly associated with starting traditional gas-powered tools. This means no more frustrating pulls on a starter cord; users can quickly fire up the trimmer and get to work. With a 0.065-inch line, the trimmer properly balances durability and cutting ability, ensuring effective weed control.

Maintenance is straightforward with the FL21 LE, featuring a user-friendly spool system that allows for easy line replacement. This is particularly convenient for those who may be new to gardening equipment. The trimmer's construction also includes a reinforced guard that protects users from debris and enhances safety during operation.

In summary, the Weed Eater FL21 LE, 530086308, is an outstanding choice for those seeking a dependable and easy-to-use string trimmer. With its lightweight design, powerful engine, ergonomic features, and user-friendly operation, it is well-suited for a variety of lawn care tasks. Whether tackling a small garden or larger lawn areas, this trimmer stands out as a reliable companion for maintaining a beautiful outdoor space.