3. Insert the shield onto the motor housing. | ALIGN INSTALLATION ARROWS |
Ensure the cutting head remains free to |
|
rotate and the line is not caught between the shield and the motor housing.
4.Twist the shield as illustrated until it snaps securely into place. Make sure the shield is assembled to the unit as shown in the illustration below and in the KNOW YOUR UNIT section of this manual.
Twist shield in direction of arrow to assemble
CAUTION: Sharp line limiter blade
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Trigger Switch |
|
| |
Cord |
| Assist | |
Retainer |
| ||
Recessed |
| Handle | |
Plug |
|
| |
|
| Twist and Edge Button | |
Locking |
| Motor Housing | |
|
| ||
Sleeve | Air | Edge Guide | |
Assembly |
| ||
| Vents |
| |
|
| Trimmer Head | |
Debris Shield | with 0.065 in. | ||
Trimmer Line | |||
|
| ||
|
| Tap Button | |
|
| Line Limiter Blade |
RECESSED PLUG
The RECESSED PLUG is where you attach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch to operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance the cutting line during operation and to remove the spool during line replacement.
TWIST AND EDGE BUTTON
The TWIST AND EDGE BUTTON is used to twist the lower portion of the unit into an edg- ing position.
EDGE GUIDE
The EDGE GUIDE protects the unit from con- tacting the ground during edging.
5