Maintenance, Service and Adjustments | Weed Eater 545117526 specification

MAINTENANCE

WARNING: Disconnect unit from the power source before performing mainte- nance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws S Assist Handle S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

STrigger Switch -- Ensure switch functions properly by pressing and releasing the trig-

ger switch. Make sure motor stops.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND LA- BELS

SAfter each use, inspect complete unit for

loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

1.Disconnect the unit from the power source.

2.Remove the spool by firmly pulling on the tap button.

3.Clean entire surface of hub and spool.

4.Replace with a pre-wound spool or cut a length of 30 feet of 0.065″ (1.65 mm) di- ameter WEED EATER brand line. Use of heavier lines could overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

5.Insert one end of the line about 1/2 inch (1 cm) into the small hole inside the spool.

6.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

7.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

8.Insert the line into the exit hole in the hub as shown in the illustration.

9.Align the notch with the line exit hole.

10.Push the spool into the hub until it snaps into place.

11.Pull on the line extending outside the hub to release it from the notch; otherwise, the unit will not function properly.

Small

Hole

Spool

Tap

Button

Line in Notch

Hub	Line exit hole

USER REPLACEABLE SERVICE PARTS

REPLACEMENT PART	PART NUMBER
Spool with 0.065″ Trimmer Line	952701663
Assist Handle	530403805
Bolt Carriage, 1/4-20	530403886
Wing Nut	530016152
Shield Assembly (RT110)	530404080
Shield Assembly (RT112)	530404076

545117526 specifications

The Weed Eater 545117526 is an innovative and efficient string trimmer designed for both residential and professional landscaping use. This powerful tool combines cutting-edge technology with user-friendly features, making it an essential addition to your gardening arsenal.

One of the standout characteristics of the Weed Eater 545117526 is its robust engine. Powered by a reliable two-stroke engine, this trimmer delivers impressive performance, enabling users to tackle thick grass and stubborn weeds with ease. The engine is engineered for efficiency, providing ample power while minimizing fuel consumption and emissions, which is a significant advantage for environmentally-conscious users.

The lightweight design of the Weed Eater 545117526 enhances its maneuverability. Weighing in at just around 10 pounds, it allows users to handle the trimmer for extended periods without experiencing fatigue. The adjustable handle provides added comfort and control, ensuring that you can navigate around landscaping obstacles efficiently.

The trimmer features a dual-line feed system that allows for quick and simple line reloads. This system is designed to save time and improve productivity, as users can easily re-thread the line without needing to disassemble the trimmer. The 0.095-inch cutting line is robust enough to slice through tough vegetation while maintaining a clean cut, providing a professional finish to any lawn.

Moreover, the Weed Eater 545117526 incorporates anti-vibration technology, reducing the fatigue associated with prolonged use. This feature enhances user comfort and control, making it easier to achieve precise cuts without straining the hands and arms.

In terms of durability, this trimmer is built with high-quality materials that withstand the rigors of outdoor use. The tough plastic housing protects the internal components from damage, while the ergonomic design ensures that it remains balanced during operation.

Overall, the Weed Eater 545117526 is a powerful and versatile tool that caters to the needs of both home gardeners and professional landscapers. Its combination of a robust engine, lightweight design, and user-friendly features makes it an ideal choice for anyone looking to maintain their outdoor space efficiently. Whether trimming grass edges or tackling unruly weeds, this trimmer is poised to deliver exceptional results with ease.