Weed Eater 545117526 Assembly, Installation of Assist Handle, Attaching the Shield

Page 4

ASSEMBLY

WARNING: If received assembled, review all assembly steps to ensure your unit is properly assembled and all fasteners are secure.

INSTALLATION OF ASSIST HANDLE

1.Place unit on a flat surface.

2.Loosen and remove wing nut and bolt from assist handle.

3.Firmly push the assist handle over the tube. To make installation easier, tilt han- dle toward trigger housing while pushing down (see illustration).

4.Reinstall bolt in handle. Thread wing nut onto bolt.

5.Adjust the handle up or down the tube to a comfortable position; tighten wing nut se- curely.

Assist handle

Trigger

Housing

Tube

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protection from the risk of thrown objects to the operator and others. Your unit is equipped with a line limiter blade, which cuts excess line to the proper length while running. The line limiter blade (on underside of shield) is sharp and can cut you.

NOTE: If shield is not properly installed, damage to unit (including motor failure) will re- sult.

1.Align the installation arrow on the shield with the installation arrow on the motor housing (see illustration below).

2.Insert the shield onto the motor housing. Ensure the cutting head remains free to rotate and the line is not caught between the shield and the motor housing.

3.Twist the shield as illustrated until it snaps securely into place. Make sure the shield is assembled to the unit as shown in the illustration below and in the KNOW YOUR UNIT section of this manual.

ALIGN INSTALLATION ARROWS

Twist shield in direction of arrow to assemble

CAUTION: Sharp line limiter blade

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Advertencia AvertissementOperator Safety Safety RulesElectrical Safety Unit Safety Cutting SafetyMaintenance Safety Transporting and StorageAssembly Installation of Assist HandleAlign Installation Arrows Attaching the ShieldOperation Operating InstructionsCorrect Operating Position Advancing the Cutting LineMaintenance Service and AdjustmentsBefore Each USE After Each USETroubleshooting Table Cause Remedy StorageLimited Warranty

545117526 specifications

The Weed Eater 545117526 is an innovative and efficient string trimmer designed for both residential and professional landscaping use. This powerful tool combines cutting-edge technology with user-friendly features, making it an essential addition to your gardening arsenal.

One of the standout characteristics of the Weed Eater 545117526 is its robust engine. Powered by a reliable two-stroke engine, this trimmer delivers impressive performance, enabling users to tackle thick grass and stubborn weeds with ease. The engine is engineered for efficiency, providing ample power while minimizing fuel consumption and emissions, which is a significant advantage for environmentally-conscious users.

The lightweight design of the Weed Eater 545117526 enhances its maneuverability. Weighing in at just around 10 pounds, it allows users to handle the trimmer for extended periods without experiencing fatigue. The adjustable handle provides added comfort and control, ensuring that you can navigate around landscaping obstacles efficiently.

The trimmer features a dual-line feed system that allows for quick and simple line reloads. This system is designed to save time and improve productivity, as users can easily re-thread the line without needing to disassemble the trimmer. The 0.095-inch cutting line is robust enough to slice through tough vegetation while maintaining a clean cut, providing a professional finish to any lawn.

Moreover, the Weed Eater 545117526 incorporates anti-vibration technology, reducing the fatigue associated with prolonged use. This feature enhances user comfort and control, making it easier to achieve precise cuts without straining the hands and arms.

In terms of durability, this trimmer is built with high-quality materials that withstand the rigors of outdoor use. The tough plastic housing protects the internal components from damage, while the ergonomic design ensures that it remains balanced during operation.

Overall, the Weed Eater 545117526 is a powerful and versatile tool that caters to the needs of both home gardeners and professional landscapers. Its combination of a robust engine, lightweight design, and user-friendly features makes it an ideal choice for anyone looking to maintain their outdoor space efficiently. Whether trimming grass edges or tackling unruly weeds, this trimmer is poised to deliver exceptional results with ease.
Top Page Image Contents