Weed Eater 545137254 instruction manual Seasonal Storage, Fuel System, Engine, Other, Porting

Page 9

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

STurn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air Filter Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Safety RulesUnit / Maintenance Safety Fuel SafetyCutting Safety AssemblyAdjusting the Handle Transporting and StorageOperation HOW to Start Your Unit HOW to Stop Your UnitStarting a Warm Engine Starting a Flooded EngineOperating Position Trimmer Line AdvanceCutting Methods Inspect and Clean Unit and DE- Cals MaintenanceClean AIR Filter Check for Loose Fasteners and PartsService and Adjustments Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Limited Warranty Ligations The U.S. EnvironmentalCenter or call Weed Eater at 800--554--6723 Intermediate 125 hours Extended 300 hours

545137254 specifications

The Weed Eater 545137254 is a versatile and powerful string trimmer that caters to both amateur gardeners and professional landscapers alike. This model showcases a blend of innovative technologies and practical features designed to make yard work effortless and efficient.

One of the standout characteristics of the Weed Eater 545137254 is its lightweight design. Weighing in at just a few pounds, it allows for easy maneuverability, reducing fatigue during extended use. This feature is particularly appreciated by homeowners who spend several hours maintaining their lawns and gardens. The ergonomic handle is designed to provide a comfortable grip, ensuring a natural stance that minimizes strain on the hands and wrists.

Powering the Weed Eater 545137254 is a robust engine that delivers impressive performance. The engine is engineered to provide a reliable start with minimal effort, thanks to its advanced starting technology. The trimmer comes equipped with a 25cc gas motor, which not only boosts efficiency but also ensures the ability to tackle even the toughest vegetation with ease.

Equipped with a dual-line cutting system, the Weed Eater 545137254 allows for a wider cutting path compared to its single-line counterparts. This feature significantly reduces the time spent on trimming, as users can cover more ground in a single pass. The automatic line advance system ensures that users always have the optimal amount of line extended for cutting, simplifying operation and maximizing productivity.

Another notable feature is the multi-position adjustable handle, which enhances control and versatility. This allows the user to trim grass and weeds in hard-to-reach areas without straining their body or compromising the quality of the work. The cutting head is also designed to rotate, facilitating easy transitions between trimming, edging, and even mowing tasks.

Maintenance is straightforward with the Weed Eater 545137254, as it includes an easy-access air filter and spark plug, simplifying routine upkeep. The fuel-efficient engine is designed to minimize emissions, making it an eco-friendly option for those concerned about their environmental impact.

In summary, the Weed Eater 545137254 strikes a perfect balance between power, ease of use, and innovative features. Whether you’re tackling tall grass or intricate garden edges, this trimmer is equipped to meet your landscaping needs effectively and efficiently, making it a valuable addition to any outdoor toolkit.
Top Page Image Contents