Weed Eater 545137254 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine

Page 5

HOW TO STOP YOUR UNIT

STo stop the engine, push and hold the STOP switch in the STOP position until the engine

stops.

SIf engine does not stop, move choke lever to FULL CHOKE position.

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Primer Bulb

Choke

Lever

Starter Handle

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to the RUN position. Allow the unit to run for 30 more seconds at RUN before releasing the throttle trigger.

NOTE: If engine dies with the choke le- ver in the RUN position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 6 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to the RUN posi- tion.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554--6723.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Safety RulesUnit / Maintenance Safety Fuel SafetyCutting Safety AssemblyAdjusting the Handle Transporting and StorageOperation HOW to Start Your Unit HOW to Stop Your UnitStarting a Warm Engine Starting a Flooded EngineCutting Methods Operating PositionTrimmer Line Advance Inspect and Clean Unit and DE- Cals MaintenanceClean AIR Filter Check for Loose Fasteners and PartsService and Adjustments Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Center or call Weed Eater at 800--554--6723 Limited WarrantyLigations The U.S. Environmental Intermediate 125 hours Extended 300 hours

545137254 specifications

The Weed Eater 545137254 is a versatile and powerful string trimmer that caters to both amateur gardeners and professional landscapers alike. This model showcases a blend of innovative technologies and practical features designed to make yard work effortless and efficient.

One of the standout characteristics of the Weed Eater 545137254 is its lightweight design. Weighing in at just a few pounds, it allows for easy maneuverability, reducing fatigue during extended use. This feature is particularly appreciated by homeowners who spend several hours maintaining their lawns and gardens. The ergonomic handle is designed to provide a comfortable grip, ensuring a natural stance that minimizes strain on the hands and wrists.

Powering the Weed Eater 545137254 is a robust engine that delivers impressive performance. The engine is engineered to provide a reliable start with minimal effort, thanks to its advanced starting technology. The trimmer comes equipped with a 25cc gas motor, which not only boosts efficiency but also ensures the ability to tackle even the toughest vegetation with ease.

Equipped with a dual-line cutting system, the Weed Eater 545137254 allows for a wider cutting path compared to its single-line counterparts. This feature significantly reduces the time spent on trimming, as users can cover more ground in a single pass. The automatic line advance system ensures that users always have the optimal amount of line extended for cutting, simplifying operation and maximizing productivity.

Another notable feature is the multi-position adjustable handle, which enhances control and versatility. This allows the user to trim grass and weeds in hard-to-reach areas without straining their body or compromising the quality of the work. The cutting head is also designed to rotate, facilitating easy transitions between trimming, edging, and even mowing tasks.

Maintenance is straightforward with the Weed Eater 545137254, as it includes an easy-access air filter and spark plug, simplifying routine upkeep. The fuel-efficient engine is designed to minimize emissions, making it an eco-friendly option for those concerned about their environmental impact.

In summary, the Weed Eater 545137254 strikes a perfect balance between power, ease of use, and innovative features. Whether you’re tackling tall grass or intricate garden edges, this trimmer is equipped to meet your landscaping needs effectively and efficiently, making it a valuable addition to any outdoor toolkit.
Top Page Image Contents