![](/images/new-backgrounds/1180374/180374315x1.webp)
6.5 When the Message “Staple mode cannot be used.” Appears | 6 |
|
6.5When the Message “Staple mode cannot be used.” Appears
To clear jammed staples in FN-116
When a finisher is installed and the staples are jammed, the message shown below appears.
Follow the procedure below to clear the jammed staples.
1Slide the finisher away from the
copier.
2Turn the dial to the left in order to position the stapler at the center.
Touch Panel Messages Chapter 6
CF2002/CF3102 |