Utility Mode Operations Chapter 5
| 5 | 5.5 Administrator Mode Operations |
|
|
12 Check the print result. If the fold line and the black lines are parallel, skip to step 13.
❍If more adjustment is necessary, return to step 7 and repeat the adjustment procedure.
13 Touch [Enter]. The Expert User’s Mode screen appears again. 14 Touch [Color Shift Correction(C)].
15 Press the [Start] key.
The automatic color shift adjustment procedure begins, and the test pattern is printed on the 11 ⋅
16 Check the distance from the reference line of the black lines to the cyan lines in the test pattern along the X and Y directions.
❍If there is no shift in the reference line, skip to step 23.
17 If the lines are shifted as shown at the
right, touch 
to specify the desired negative adjustment for “X” (between
18 If the lines are shifted as shown at the
right, touch 
to specify the desired positive adjustment for “X” (between +1 dot and +6 dots).
CF2002/CF3102 |
