![](/images/new-backgrounds/1180374/180374117x1.webp)
Utility Mode Operations Chapter 5
| 5 | 5.2 Specifying Default Settings (“User’s Choice” Functions) |
|
|
To set the “Sleep” function
This function is used to specify the length of time after the last operation until the copier automatically enters Sleep mode. The copier only enters Sleep mode if the “Disable Sleep Mode” function of the Administrator mode is set to “No”. (The default setting is “30 min”.)
For details on the Sleep mode, refer to “Original Documents/Feeding the Document” in the Basic Operations volume.
1Press the [Utility] key.
2Touch [User’s Choice: 1].
3Touch [2/2].
4Touch [Sleep].
5Press the [C] (clear) key. The current setting is erased.
6Using the keypad, enter the desired length of time (between 15 and 240 minutes).
❍If you do not want the copier to enter Sleep mode, touch [No].
7Touch [Enter].
8Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.
CF2002/CF3102 |