To specify the initial mode settings

Utility Mode Operations Chapter 5

	5	5.1 Utility Screen
	5

Specifying the Initial Mode Settings (“Reset Mode” Function)

The mode selected when the power switch is turned on (set to “I”) is called the initial mode.

The settings for the mode selected when the power switch is turned on (set to “I”) can be specified using the “Reset Mode” function.

1Select the desired Copy mode settings.

❍For details on selecting Copy mode settings, refer to “Specifying Copy Settings” in the Basic Operations volume.

2Press the [Utility] key.

3Touch [Input].

4Touch [Reset Mode].

5Touch [Set-up Mode].

6Touch [Input].

Note

If [Set-up Mode] is selected, the current Copy mode settings are stored as the initial mode settings.

7Touch [Enter], and then touch [Enter] again in the screen that appears.

8Touch [Fin. Time].

5-4	CF2002/CF3102