5.5 Administrator Mode Operations | 5 | |
|
| |
19 If the lines are shifted as shown at the |
| |
right, touch [Y], and then touch |
| |
to specify the desired negative |
| |
adjustment for “Y” (between |
| |
|
| |
20 If the lines are shifted as shown at the |
| |
right, touch | to specify the |
|
desired positive adjustment for “Y” |
| |
(between +1 dot and +6 dots). |
| |
Chapter 5
21 Press the [Start] key. The adjusted test pattern is printed on 11 ⋅
22 Check the print result. If the distance between the reference line of the black lines and the cyan lines is adjusted to 0, skip to step 23.
❍If more adjustment is necessary, return to step 14 and repeat the adjustment procedure.
23 Touch [Enter]. The Expert User’s Mode screen appears again.
24 Touch [Color Shift Correction(M)]. Repeat the procedure for adjusting the cyan shift (steps 13 to 23) to adjust the magenta shift.
25 Touch [Color Shift Correction(Y)] and repeat the same procedure for the yellow shift.
26 Touch [Enter].
The Expert User’s Mode screen appears again.
27 Touch [Fin. Time] again in the next three screens that appear.
Utility Mode Operations
CF2002/CF3102 |
