Minolta CF2002 When the Message Remove Punch scraps. Appears, Display in Enlarge Display Mode

6.6 When the Message “Remove Punch scraps.” Appears

6

6.6When the Message “Remove Punch scraps.” Appears

If the punch kit is installed in the finisher FN-8, the following message will appear when the hole-punch waste container is full.

Display in Enlarge Display Mode

If the hole-punch waste container is full, appears in the screen on the touch panel.

Touch to display a message (if it can be emptied by the user).

Touch Panel Messages Chapter 6

CF2002/CF3102 6-51