Touch Panel Messages Chapter 6

 

6

6.5 When the Message “Staple mode cannot be used.” Appears

 

 

16 Insert the staple cartridge, making sure the tabs on the cartridge slide along the rails in the compartment.

17 Fully insert the staple cartridge so that it locks into place.

Check that the staple cartridge

is firmly installed.

18 Carefully move the stapler unit back into its original position. 19 Close the front door.

20 Slide the finisher back against the copier.

6-50

CF2002/CF3102

Page 165
Image 165
Minolta CF2002 manual Touch Panel Messages Chapter