Touch Panel Messages Chapter 6
| 6 | 6.4 When the Message “Misfeed detected.” Appears |
|
|
4Open the front door of the finisher.
5 Turn 
clockwise until the removal indicator is completely blue.
❍ If the dial is turned too far, turn it counterclockwise to adjust it.
Note
If the message “Misfeed detected”. appears, be sure to perform these steps. If the paper is pulled out with too much force without performing
these steps, the finisher may be damaged.
6Open the upper door of the finisher, and then pull out any
paper in the feed section.
7Close the upper door.
CF2002/CF3102 |
