Precautions Chapter 3
| 3 | 3.1 Installation Precautions |
|
|
3.1Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements.
-A location away from curtains, etc. that may catch fire and burn easily
-A location that is not exposed to water or other liquids
-A location free from direct sunlight
-A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures
-A
-A location that is not exposed to high humidity
-A location that is not extremely dusty
-A location not subjected to undue vibrations
-A stable and level location
-A location where ammonia or other organic gases are not generated
-A location that does not put the operator in the direct airflow of exhaust from the copier
-A location that is not near any kind of heating devices
Power Source
The power source requirements are as follows.
Voltage fluctuation: Maximum ±10%
(AC 127 V areas only: Between
Frequency fluctuation: Maximum ±0.3%
❍Use a power source with as little voltage or frequency fluctuations as possible.
CF2002/CF3102 |
