Minolta CF2002 manual These steps, the finisher may be damaged

6.5 When the Message “Staple mode cannot be used.” Appears 6

6 Turn misfeed-clearing dial clockwise until the removal indicator is completely blue.

❍ If the dial is turned too far, turn it counterclockwise to adjust it.

✎

Note

If the message “Staple mode cannot be used.” appears, be sure to perform these steps. If the paper is pulled out with too much force without performing

these steps, the finisher may be damaged.

7Pull out any paper fed into the output tray.

8Open the transport guide, and then pull out any paper in the transport section.

✎

Note

If the paper cannot easily be pulled out, stop trying to pull it out. Pulling out the paper with too much force may damage the folding unit.

If the paper cannot be pulled

out easily, turn the misfeed-clearing dial in the folding section as described in the following step, and then pull out the paper.

Touch Panel Messages Chapter 6

CF2002/CF3102 6-47