Minolta CF2002 manual

4.1 Components and Their Functions

4

	13				8
						9
	12
						10
						11
No.	Part Name			Description
8	Original Cover OC-2	Presses down on the loaded document to keep it in place
	(optional)	Referred to as the original cover throughout the manual
9	Duplex Unit AD-14 (optional)	Turns over copies, allowing double-sided copies to be made
		automatically.
		• If a printer controller (CN3102Pro or CN3102e) and the
			duplex unit are installed on the CF3102, the memory must be
			expanded. If the optional memory is not installed, automatic
			double-sided copying cannot be performed.
		Referred to as the duplex unit throughout the manual
10	Paper Feed Unit	Equipped with a paper drawer that can supply 500 sheets of
	PF-118 (optional)	paper; up to two paper feed units can be installed.
		Referred to as the paper feed unit throughout the manual
11	Copy Table CT-2 (optional)	A paper feed unit can be set up on the copy table, and then the
		printer can be set up on the top.
		By setting up the printer on the copy table, the printer can be
		placed on the floor instead of on a desk, keeping the entire
		surface of the desk free.
		Referred to as the copy table throughout the manual
12	Finisher FN-8 (optional)	Finishes copies according to the selected finishing mode
		(sorting, stapling, hole-punching or binding), then feeds out the
		pages
		• The hole-punching function is only available if the optional
			punch kit (PK-4) is installed onto finisher FN-8. If the finisher
			is installed, the printer must be installed on the copy desk, on
			the large capacity cabinet or over a paper feed unit combined
			with the copy table.
13	Copier Stand CS-2 (optional)	Reduces the installation area required for the equipment if the
		scanner is installed on the top of the stand and the printer is
		installed on the inside
		Referred to as the copier stand throughout the manual

Part Names and Their Functions Chapter 4

CF2002/CF3102 4-3