Utility Mode Operations Chapter 5
| 5 | 5.2 Specifying Default Settings (“User’s Choice” Functions) |
|
|
To set the “Auto Panel Reset” function
This function is used to specify the length of time after the last operation until all functions automatically return to their default settings. (The default setting is
[1 min.].)
For details on the automatic panel reset, refer to “Original Documents/Feeding the Document” in the Basic Operations volume.
1Press the [Utility] key.
2Touch [User’s Choice: 1].
3Touch [2/2].
4Touch [Auto Panel Reset].
5Press the [C] (clear) key. The current setting is erased.
6Using the keypad, enter the desired length of time (between 1 and 9 minutes).
❍If you do not wish for the copier to automatically reset its modes and functions, touch [No].
7Touch [Enter].
8Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.
CF2002/CF3102 |
