Utility Mode Operations Chapter 5
| 5 | 5.5 Administrator Mode Operations |
|
|
To set the “Top Erase” function
This function is used to set the amount of loss at the edge of the original. This amount is erased during printing. (The default setting is [5 mm].)
1Press the [Utility] key.
2Touch [Admin. Mode].
3Using the keypad, enter the administrator access code.
4Touch [Admin. set].
5Touch [Top Erase].
6Select the desired setting.
7Touch [Enter].
8Touch [Fin. Time] again in the next three screens that appear.
CF2002/CF3102 |
