![](/images/new-backgrounds/1180374/180374121x1.webp)
Utility Mode Operations Chapter 5
| 5 | 5.2 Specifying Default Settings (“User’s Choice” Functions) |
|
|
To set the “Enlarge-Display Notice” function
If the “Auto Clear Mode” function is set to “Yes”, the message requesting confirmation to cancel the Enlarge Display mode can be displayed. (The default setting is “No”.)
In addition, it is possible to specify the length of time that the message requesting confirmation to cancel the Enlarge Display mode is displayed.
For more details, refer to “Confirming the Cancellation of the Enlarge Display Mode” in “Before Making Copies” of the Enlarge Display Operations Guide.
1Press the [Utility] key.
2Touch [User’s Choice: 1].
3Touch [2/2].
4Touch
5Select the desired setting and specify the length of time (30, 60,
90 or 120 seconds) that the message requesting confirmation to cancel the Enlarge Display mode is displayed.
6If you do not wish for the message requesting confirmation to cancel the Enlarge Display mode to appear, touch [No].
7Touch [Enter].
8Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.
CF2002/CF3102 |