5.5 Administrator Mode Operations | 5 |
|
9Check that the top margin of the test
pattern is between
4.5 mm and 5.5 mm. If
the top margin is within |
| a |
|
| |
the specified range, |
|
|
skip to step 14. |
|
|
a: 5.0 mm ± 0.5 mm
10 If the top margin is less than 4.5 mm, touch 
to specify the desired positive adjustment (between +0.1 mm and +3.0 mm).
11 If the top margin is more than 5.5 mm, touch 
to specify the desired negative adjustment (between
12 Press the [Start] key. The adjusted test pattern is printed on 11 ⋅
13 Check the print result to make sure that the top margin is adjusted to between 4.5 mm and 5.5 mm.
❍If more adjustment is necessary, return to step 8 and repeat the adjustment procedure.
14 Touch [Enter].
15 Touch [Fin. Time] again in the next three screens that appear.
Utility Mode Operations Chapter 5
CF2002/CF3102 |
