5.5 Administrator Mode Operations
To set the “Thick Paper and OHP Film Image Density” function
5
This function allows the density of the image printed on thick paper and overhead projector transparencies to be adjusted. (The default settings are [the standard settings (middle settings)].)
1Press the [Utility] key.
2Touch [Admin. Mode].
3Using the keypad, enter the administrator access code.
4Touch [Expert Mode].
5Touch [Thick Paper and OHP Film Image Density].
Chapter 5
6Touch 
and 
to adjust the image density.
7Touch [Enter].
8Touch [Fin. Time] again in the next three screens that appear.
Utility Mode Operations
CF2002/CF3102 |
