Minolta CF2002 manual Utility Screen, Operations

5-2

CF2002/CF3102

(Refer to p. 5-6)

The various copy programs stored with the “Job Memory Input” function, described above, can be recalled.

(Refer to p. 5-35)

The Administrator mode allows the use of the copier to be controlled, by allowing various functions to be set according to the use.

The administrator access code (4-digit password) must be entered in order to set the Administrator mode functions. For details on the administrator access code, contact the technical representative.

The level of use for the various supplies and parts can be checked.

The functions available on the Utility screen, displayed by pressing the [Utility] key, are described below.

If the [Utility] key is pressed, the following screen appears.

5

5.1 Utility Screen

5.1Utility Screen

		(Refer to p. 5-3)
	“Reset Mode” function: The initial mode settings, selected after the copier is
		reset, can be changed.
5
		“Job Memory Input” function: Up to 10 copy modes can be stored as copy
Chapter
		programs.
		(Refer to p. 5-7)
	The various functions can be set according to the user’s needs.
Operations	There are two User’s Choice screens.
		❍ The functions that can be set while a job is printing are on the User’s Choice:
		1 screen, and the functions that can be set while the copier is waiting to print
		are on the User’s Choice: 2 screen.
		(Refer to p. 5-32)
Mode
	The various counters, showing the number of copies that have been made since
		the copier was installed, can be viewed.
Utility
		(Refer to p. 5-34)