Minolta CF2002 manual Other Messages

Touch Panel Messages Chapter 6

6 6.11 Other Messages

6.11Other Messages

Message	Cause	Remedy
Original left on the Glass.	The document was left on the	Remove the document from the
	original glass.	original glass.
Matching paper size is not	Paper of a suitable size is not	Either select a different copy size
available.	loaded in a paper drawer.	or manually feed paper of a
Reselect the paper size.		suitable size.
Original’s size cannot be	(1) The document is not	(1) Position the document
detected.	positioned correctly.	correctly.
Reselect the paper size.	(2) A document with an	(2) Select the correct paper size.
	unspecified size or with a size too
	small to be detected is loaded.
This mode cannot be selected	Functions that cannot be used	Make copies using only one of
with the XXXXXX.	together are selected.	the functions.
The Exit Tray has reached its	Since the maximum amount of	Remove all copies from the
capacity.	copies for the indicated finisher	indicated tray.
	output tray has been exceeded,
	the copier is unable to make
	copies.
Please input your 4-digit	Access codes have been	Enter your access code.
Access# and press the Access	specified. Copies cannot be	(See section 2.6 of the Basic
key.	made unless a specified access	Operations volume.)
	code is entered.
Your account has reached its	The limit on the number of copies	Contact your technical
maximum allowance.	that can be made has been	representative.
	reached.
Section -> is open.	Since a copier door or cover is	Make sure that all doors and
Close it properly.	open or an option is not installed	covers are closed and that all
	correctly, the copier is unable to	options are installed correctly.
	make copies.
Please insert the Fusing Unit	The fusing unit is not installed	Reinstall the supplies or parts, or
and close all doors.	correctly.	contact your technical
		representative.
Install the CF toner cartridge,	The indicated toner cartridge is
and then move the lever to the	not installed correctly.
correct position.
Please insert the Waste Toner	The waste-toner bottle is not
Bottle and close all doors.	installed correctly.
Please insert the Image	The image transfer belt unit is not
Transfer Belt Unit and close all	installed correctly.
doors.
Replenish paper.	The indicated drawer has ran out	Load paper into the indicated
	of paper.	drawer.
		(See section 3.5 of the Basic
		Operations volume.)
CF Toner cartridge (X) needs to	The toner for the indicated color	Replace the toner cartridge
be replaced soon.	is about to run out.	according to your maintenance
		agreement.
Toner X is empty.	Since the toner for the indicated
	color has run out, the copier is
	unable to make copies.

6-58 CF2002/CF3102