5.1 Utility Screen | 5 |
|
Using Copy Programs
A
Each of the 10 copy programs that can be stored can be given a name (up to 9 characters long).
To store a copy program
1Select the desired Copy mode settings.
❍For details on selecting Copy mode settings, refer to “Specifying Copy Setting” in the Basic Operations volume.
2Press the [Utility] key.
3Touch [Input].
4Touch [Job Memory Input].
5Touch the number of the program where you wish to store the settings.
A screen appears, allowing you to enter the name of the program.
6Touch the letters and numbers to enter a name (9 characters long) for the copy job, and then touch [Enter].
❍To delete a copy program
Touch [Delete], and then touch the number of the program that you wish to delete. When the number of the program is selected, the program is deleted.
❍To check the specified settings of a program
Touch [Check], and then touch the number of the program that you wish to check. The specified Copy mode settings are displayed. To return to the Job Memory Input screen, touch [Enter].
CF2002/CF3102 |
Utility Mode Operations Chapter 5
