Minolta CF2002 manual Soft cloth dampened with a mild

Troubleshooting Chapter 7

7 7.1 When the Print Quality Is Low

Symptom	Possible Cause	Remedy
The edge of the printed output is	The document pad is dirty.	Clean the document pad with a
dirty.		soft cloth dampened with a mild
		detergent. (See p. 8-9)
	The selected paper size is	Select a paper size that is the
	larger than the document (with	same size as the document.
	Zoom set to “⋅ 1.000”).	(See section 2.2 in the Basic
		Operations volume.)
		Otherwise, set Zoom to “Auto
		Size” to enlarge the copy to the
		selected paper size.
		(See section 5.3 in the Basic
		Operations volume.)
	The orientation of the document	Select a paper size that is the
	is different from the orientation	same size as the document.
	of the paper (with Zoom set to	Otherwise, select a paper
	“⋅ 1.000”).	orientation that is the same as
		that of the document.
	The copy was reduced to a size	Select a zoom ratio that adjusts
	smaller than the paper (a	the document size to the
	CustomZoom setting was	selected paper size.
	selected).	(See section 5.3 in the Basic
		Operations volume.)
		Otherwise, set Zoom to “Auto
		Size” to reduce the copy to the
		selected paper size.
		(See section 5.3 in the Basic
		Operations volume.)

7-4 CF2002/CF3102