5.2 Specifying Default Settings (“User’s Choice” Functions) 5
CF2002/CF3102 5-17
Utility Mode Operations Chapter 5
To set the “Energy Saver” function
This function is used to specify the length of time after the last operation until the
copier automatically enters Energy Saver mode. (The default setting is [15 min.].)
for entering Energy Saver mode.
For details on the Energy Saver mode, refer to “Original Documents/Feeding the
Document” in the Basic Operations volume.
1Press the [Utility] key.
2Touch [User’s Choice: 1].
3Touch [2/2].
4Touch [Energy Saver].
5Press the [C] (clear) key.
The current setting is erased.
6Using the keypad, enter
the desired length of
time (between 10 and
240 minutes).
7Touch [Enter].
8Touch [Fin. Time], and
then touch [Fin. Time]
again in the screen that
appears.