Minolta CF2002 manual Function Combination Table

Appendix Chapter 8

8 8.3 Function Combination Table

Text Enhancement setting has no effect on, such as “Photo Image”.

Next, select a Photo/Density setting where the Text Enhancement setting can be specified, such as the “Text” setting (32) or the “Map” setting (34). The previously specified Text Enhancement setting of “+3 (Darker)” is maintained.

:The “Centering” function from the Utility mode can be set, but will not be applied.

Number of	Number of	Description
First Setting	Next Setting
1	57, 58	Number of copies:
		If the entered number of copies exceeds the number allowable for the
		“Non-sort” and “stapling” settings, a message warning that the number
		of copies for stapling has been exceeded. If the warning is ignored and
57, 58	1
		the job is started, the “stapling” setting is canceled.
4	77 ~ 82, 85	Color setting “Auto Color”
		The functions cannot be combined with the Color setting “Auto Color”.
77 ~ 82, 85	4
		However, if the Color setting “Auto Color” determines that the Color
		setting “Black” should be used, printing continues without the setting for
		the Color image Adujst parameters applied.
40	12 ~19	1st drawer (multipurpose paper drawer):
		The functions cannot be combined if a paper size that cannot be loaded
		into the 1st drawer is selected.
48, 50, 52,	11~19	A message appears, warning that the 1st drawer is selected and the
53, 54		paper type was changed.
23, 27	67	“Multi-Page Enlargement” function:
		The zoom ratio specified for the “Multi-Page Enlargement” function is
		applied.
67	23, 27	“Multi-Page Enlargement” function: A zoom ratio cannot be specified.
74	63, 68	“Mixed Orig Detection” function:
		The function can be selected, but the setting is not applied.
63, 68	74
57, 58	76	Interrupt mode:
		With the stapling on finisher FN-8, printing is interrupted between copy
		sets.
67	76	Interrupt mode: The job cannot be interrupted while scanning for the
		“Multi-Page Enlargement” function.
63, 66, 67, 68	89	“Centering” function:
		The function can be selected, but the setting is not applied.
89	63, 66, 67, 68
90	11~19	“Job Memory Input” function: A program using the 1st drawer cannot be
		stored.
All	All	Test prints:
		Another function cannot be selected while a test print is being printed.
		When a test print is printed, the mode returns to the one before the test
		print was performed. The paper drawer is selected according to the
		priority order.

8-18 CF2002/CF3102