5.2 Specifying Default Settings (“User’s Choice” Functions) | 5 |
|
To set the “Memory Recall” function
Memory recall function (The default setting is [Yes].)
✔This feature allows past copy jobs to be recalled and printed again.
✔Up to 49 past copy jobs are saved.
✔If the number of copy jobs exceeds 49 or the memory becomes full, jobs are deleted, starting from the oldest.
✔Deleted jobs cannot be recalled. For details on recalling past copy jobs, refer to “Original Documents/Feeding the Document” in the Basic Operations volume.
✔The “Memory Recall” function and the “Copy Track” function cannot be used at the same time. In order to use the “Memory Recall” function, the “Copy Track Mode” parameter on the “Copy Track” screen must be set to “No”. For details on setting the “Copy Track Mode” parameter on the “Copy Track” screen, refer to “To set the “Copy Track Mode” parameter” in chapter 5 “Utility Mode Operations” of the Administrator Operations volume.
1Press the [Utility] key.
2Touch [User’s Choice: 1].
3Touch [Memory Recall].
Note
If the “Copy Track Mode” parameter on the “Copy Track” screen is set to “Yes”, the Memory Recall job control screen cannot be displayed, even if [Memory Recall] is touched. If the “Memory Recall” function on the User's Choice: 1 screen is set to “Yes”, setting the “Copy Track Mode” parameter on the “Copy Track” screen to “Yes” automatically changes the “Memory Recall” function to “No”.
For details on setting the “Copy Track Mode” parameter on the “Copy Track” screen, refer to “To set the “Copy Track Mode” parameter” of “Supervising Copier Use (Copy Track Functions)” in chapter 5 “Utility Mode Operations”.
Utility Mode Operations Chapter 5
CF2002/CF3102 |
