5.5 Administrator Mode Operations |
|
|
|
|
|
| 5 |
|
|
|
|
|
|
|
|
| |
9 Check that the left |
|
|
|
|
|
|
|
|
margin of the test |
| c |
|
|
|
|
|
|
pattern for the second |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
side is between 2.5 mm |
|
|
|
|
|
|
|
|
and 3.5 mm. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If the left margin for the second side is within the specified range, skip to step 14.
c: 3.0 mm ± 0.5 mm
10 If the left margin for the second side is less than 2.5 mm, touch 
to specify the desired positive adjustment (between +0.1 mm and +3.0 mm).
11 If the left margin for the second side is more than 3.5 mm, touch 
to specify the desired negative adjustment (between
12 Press the [Start] key.
The adjusted test pattern is printed on 11 ⋅
13 Check the print result to make sure that the left margin for the second side is adjusted to between 2.5 mm and 3.5 mm.
❍If more adjustment is necessary, return to step 8 and repeat the adjustment procedure.
14 Touch [Enter].
15 Touch [Fin. Time] again in the next three screens that appear.
Utility Mode Operations Chapter 5
CF2002/CF3102 |
