Carburetor Idle Speed Adjustment

WARNING: Keep others away when making idle speed adjustments. The blade will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. When making adjust- ments, use a screwdriver short enough to keep your hands behind the handguard and away from the blade. After making adjust- ments, the blade must not move at idle speed. The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SEngine will not idle when the throttle is re-

leased.

SThe blade moves at idle. Keep others away

when making idle speed adjustments. Make adjustments with the unit resting on a level surface free of debris that can be caught in the hedge trimmer blade. Serious injury to the operator and others can occur if the car- buretor is not properly adjusted. Keep all parts of your body away from the blade and muffler.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without blade moving (idle too fast) or en- gine stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if the blade moves at idle.

WARNING: Recheck the idle speed after each adjustment. The blade must not move at idle speed to avoid serious injury to the operator or others.

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an au-

thorized	service	dealer	or	call
1--800--554--6723.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Filter

Fuel Line

-- 7 --

952711803, 952711802 specifications

The Weed Eater models 952711802 and 952711803 are robust tools designed to make yard maintenance more efficient and convenient. These two-string trimmers have gained popularity for their exceptional features and innovative technologies aimed at enhancing performance while ensuring user satisfaction.

One of the primary characteristics of both models is their lightweight design. Weighing in at just around 10 pounds, these trimmers provide users with a comfortable grip, minimizing fatigue during extended use. This portability allows for easy maneuverability around various terrains, including slopes and tight spaces that a mower might not reach.

Equipped with a powerful 25cc 2-cycle engine, the 952711802 and 952711803 are designed to deliver reliable performance. The engine operates at a high RPM, enabling swift cutting of thick weeds and grass. The trimmers also feature a dual-line system that automatically feeds the line during operation, which is a significant time-saver as it eliminates the need for manual line adjustments.

Another noteworthy feature is the ergonomic design. Both models have a telescoping shaft that can be easily adjusted to fit the user's height, ensuring a comfortable working position. The handle is padded and designed to reduce vibration, allowing for a smoother experience. This user-friendly design is complemented by an easy-start technology, which simplifies the ignition process compared to traditional pull-starts.

In terms of durability, Weed Eater has incorporated high-quality materials into the construction of these trimmers. The cutting head is reinforced to withstand wear and tear, making it suitable for both residential and light commercial use. Additionally, the models are equipped with shield protection that helps to contain debris, ensuring safety for the user while working.

For enhanced capability, the Weed Eater 952711802 and 952711803 are also compatible with various attachments, making them versatile tools for different landscaping tasks such as edging, pruning, and even tilling. This adaptability ensures that the trimmers can be used year-round, enhancing their value.

Overall, the Weed Eater 952711802 and 952711803 provide a balance of power, ergonomics, and durability, making them suitable choices for anyone seeking to maintain their lawn with efficiency and ease. The combination of advanced technology and thoughtful design positions these trimmers as reliable partners in yard work, allowing users to achieve professional-quality results with every use.