Weed Eater 952711865 Maintenance, Service and Adjustments, Before Each USE, After Each USE

Page 7

SWEEPING

 

The fanning action of the rotating line can be

 

Sweeping

used for a quick and easy clean up. Keep the

 

 

line parallel to and above the surfaces being

 

swept and move the tool from side to side.

 

MAINTENANCE

WARNING: Disconnect unit from the power source before performing mainte- nance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws

SLocking Sleeve Assembly S Assist Handle

S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

STrigger Switch -- Ensure switch functions properly by pressing and releasing the trig-

ger switch. Make sure motor stops.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND LA- BELS

SAfter each use, inspect complete unit for

loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

1.Disconnect the unit from the power source.

2.Remove the spool by firmly pulling on the tap button.

3.Clean entire surface of hub and spool.

4.Replace with a pre-wound spool or cut a length of 30 feet of 0.065″ (1.65 mm) di- ameter WEED EATER brand line. Use of heavier lines could overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

5.Insert one end of the line about 1/2 inch (1 cm) into the small hole inside the spool.

6.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

7.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

8.Insert the line into the exit hole in the hub as shown in the illustration.

9.Align the notch with the line exit hole.

10.Push the spool into the hub until it snaps into place.

11.Pull on the line extending outside the hub to release it from the notch; otherwise, the unit will not function properly.

Small

Hole

Spool

Tap

Button

Line in Notch

Hub

Line exit hole

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Avertissement AdvertenciaOperator Safety Safety RulesElectrical Safety Transporting and Storage Unit SafetyCutting Safety Maintenance SafetyAttaching the Shield AssemblyTube Assembly Installation of Assist HandleOperation Advancing the Cutting Line Operating InstructionsAttach the Extension Cord to Your Trimmer Correct Operating PositionAfter Each USE MaintenanceService and Adjustments Before Each USEIncorrect line size User Replaceable Service PartsTroubleshooting Table Cause Remedy Electrical failureCanada, contact Statesville RoadWeed Eater

952711865 specifications

The Weed Eater 952711865 is a versatile, powerful string trimmer designed to make yard work more efficient and effective. This model stands out for its robust performance, ease of use, and innovative technologies that cater to both novice gardeners and seasoned landscapers.

One of the main features of the Weed Eater 952711865 is its lightweight design, which allows for effortless maneuverability. Weighing in at just around 10 pounds, this trimmer enables users to work for extended periods without experiencing excessive fatigue. Its ergonomic handle is designed to provide comfort and control, ensuring a pleasant trimming experience.

The engine of the Weed Eater 952711865 is a reliable 2-cycle gasoline engine that delivers impressive power. With a displacement of 25cc, it offers adequate strength to tackle thick grass, weeds, and brush, making it suitable for various lawn maintenance tasks. The easy starting system reduces the hassle often associated with starting small engines, allowing users to get to work quickly.

The trimmer is equipped with a dual-line feed head that allows for efficient cutting. This feature enables users to quickly replace or refill the trimmer line, minimizing downtime during work. Additionally, the auto-feed function ensures that the line advances automatically, providing continuous cutting without manual intervention.

One noteworthy technology featured in the Weed Eater 952711865 is its Smart Start feature. This innovation significantly reduces the effort needed to start the engine, allowing users to pull the starter rope with minimal resistance. This is especially beneficial for older users or those unfamiliar with operating gas-powered equipment.

The Weed Eater 952711865 also offers adjustable shaft length, allowing users to customize it according to their height or preference. This adaptability ensures that everyone can find a comfortable working position, which enhances precision and reduces strain on the back and arms.

In terms of maintenance, the model is designed for easy access to key components, making routine upkeep straightforward. The air filter and spark plug are easily reachable, simplifying the maintenance process and extending the trimmer's lifespan.

Overall, the Weed Eater 952711865 blends power, comfort, and modern technology, making it an excellent choice for anyone looking to maintain a well-groomed lawn. Whether tackling overgrown areas or performing regular touch-ups, this string trimmer delivers reliable results with minimal effort.
Top Page Image Contents