Philips AZ783 user manual Troubleshooting, Maintenance

•File name in Unicode UTF8 (maximum length: 128 bytes)

Unsupported formats:

•Empty albums: an empty album is an album that does not contain MP3/WMA files, and is not be shown in the display.

•Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played.

•AAC, WAV, PCM audio files

•DRM protected WMA files (.wav, .m4a,

.m4p, .mp4, .aac)

•WMA files in Lossless format

Maintenance

Clean the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Clean discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.

•Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.

Clean the disc lens

•After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

9 Troubleshooting

Warning

•• Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.

No power

•• Ensure that the AC power plug of the unit is connected properly.

•• Ensure that there is power at the AC outlet.

•• Insert the batteries with their polarities (+/– signs) aligned as indicated.

•• Replace the battery.

No sound or poor sound

•• Adjust the volume.

No response from the unit

•• Disconnect and reconnect the AC power plug, then turn on the system again.

•• As a power-saving feature, the unit switches off automatically 15 minutes after track play reaches the end and no control is operated.

Remote control does not work

•• Before you press any function button, first select the correct source with the remote control instead of the main unit.

•• Reduce the distance between the remote control and the unit.

•• Insert the battery with its polarities (+/– signs) aligned as indicated.

•• Replace the battery.

13EN