Huawei WS320 manual Select Use Windows to configure my wireless network settings

Page 39

4.Select Use Windows to configure my wireless network settings.

4.Select Use Windows to configure my wireless network settings.

5.Click View Wireless Networks.

6.In the Wireless Network Connection dialog box, select the wireless network to be connected to from the wireless network list, and then click Connect in the lower right corner of the dialog box.

7.In the displayed dialog box, enter the network access password, and then click Connect.

After the password is verified, Connected appears on the icon of the wireless network in the wireless network list, which indicates that your PC is connected to the wireless network.

8.Close the Wireless Network Connection dialog box.

9.In the Wireless Network Connection Properties dialog box, click OK.

How can I quickly restore the WS320 to the default settings?

When the WS320 is powered on, press and hold the reset button of the WS320 for over 1s by using an object with a sharp point (such as a pin), and then release the button. Then the WS320 automatically restarts and the default settings are restored.

Does the WPS function have any special requirement on the wireless encryption settings of a wireless router?

The WPS function has no special requirement on the wireless encryption settings; however, it is recommended that you use the Wi-Fi Protected Access 2–Pre-shared key (WPA2-PSK) security mode together with the Advanced Encryption Standard (AES) encryption rather than the Wired Equivalent Privacy (WEP) encryption method for accessing a wireless network. The

33

Image 39

Contents User Guide WS320 Wireless RepeaterUser Guide WS320 Wireless RepeaterShenzhen AddressHuawei Industrial Base Bantian, LonggangTrademarks and Permissions NO WARRANTY Import and Export Regulationsexactly match the product or its accessories you purchase 5 FAQs ContentsWarnings and Precautions Setting Up a Wireless Connection1 Warnings and Precautions Environmental Requirements for Using the DeviceBasic Requirements Precautions for Using Wireless Devices Safety of ChildrenAreas with Inflammables and Explosives Disposal and Recycling Information MaintenanceEU Regulatory Conformance Reduction of Hazardous SubstancesPage Page Notice This device may be operated in all member states of the EU 2 Function Overview 1 Wireless router3 and 4 PCs with a wireless network adapter installed on each 3 Setting Up a Wireless Connection Setting Up a Wireless Connection Through the WPS Button BC A Page Page If the indicator turns solid yellow after blinking in yellow, it indicates that the WS320 fails to connect to the wireless network. For a solution, see 5 FAQs Page Step 5 Place the PC in Room C. After being started, the PC automatically connects to the wireless network extended by the WS320. At this moment, the extended network can be used the same as that implemented in Room A Page SSID AP Page SSID AP SSID Repeater 1. Click Manual Connecting Page z If the indicator turns solid yellow after blinking in yellow, it indicates that the WS320 fails to connect to the wireless network. In this case, try to connect to the wireless network again on the quick configuration webpage Page SSID AP Page Logging In to the Advanced Configuration Webpage When the WS320 Is Not Connected to the Wireless Router4 Maintaining the WS320 Connecting to a New Wireless Network Changing the IP Address of the LAN Interface Restoring Default Settings 5 FAQssometimes. In this case, what should I do? 3. From the services listed in the right pane of the Computer 9. In the Wireless Network Connection Properties dialog box, click OK 4. Select Use Windows to configure my wireless network settings5. Click View Wireless Networks 8. Close the Wireless Network Connection dialog boxIf several SSIDs are enabled on my wireless router, when the WS320 tries to connect to a wireless network by using the WPS function, which wireless network does the WS320 connect to? 6 Appendix Hardware Features1 Reset button used to restore the default settings of the WS320 2 Power plug used to connect to a power socketDescription Default Settings Technical Specifications Dimensions L × W × HSubnet mask of the LAN interface 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, and wireless router with no obstacle and interference802.11b, 802.11g, and 802.11n 2.4-2.4835 GHz Maximum distance of 150 m from the WS320 to aPreserve well. No reissue Warranty CardLimited Warranty Special NoticeExclusions Postal Code Peoples Republic of China Huawei Industrial Base Bantian, Longgang Shenzhen

Related manuals

Manual 47 pages 4.34 Kb