
3.4Mounting of quick coupling
3.5Mounting of high pressure hose
Nilfisk P 130.2 / P 150.2 / P 160.2 |
|
1. Screw the quick coupling | EN |
tight on to the water inlet (2). |
|
Note: The inlet fi lter must al- |
|
ways be fi tted in the water inlet |
|
pipe to filter out sand, limestone |
|
and other impurities as these |
|
will damage the pump valves. |
|
Caution: Failure |
|
to fi t the fi lter will |
|
invalidate the |
|
guarantee. |
|
Attach the high pressure hose |
|
(4) to the spray handle (7). |
|
Detach the high pressure hose |
|
by pressing the pawl. |
|
4 Operating your pressure washer
4.1Connection of high pres- sure hose
Machines without hose reel: At- tach the high pressure hose (4) to the high pressure connection of the machine (3).
Only max. 7 m additional exten- sion hose can be added.
Machines with hose reel: Un- wind the high pressure hose completely.
7