Nilfisk P 130.2 / P 150.2 / P 160.2
5Fields of application and working methods
EN
5.1 General | Effi cient high presure cleaning is achieved by following a few |
| guidelines, combined with your own personal experience of spe- |
| cifi c cleaning tasks. Accessories and detergents, when correctly |
| chosen, can increase the efficiency of your pressure washer. Here |
| is some basic information about cleaning. |
5.1.1Detergent and foam Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct contact with the dirt. Detergents are applied from bottom to top, for example on a car bodywork, in order to avoid "super clean" areas, where the detergent collects in higher concentration and streams downwards. Let the detergent work for several minutes before rinsing but never let it dry on the surface being cleaned. Note: It is important that the detergents do not dry up. Otherwise the surfac that has to be cleaned can be damaged.
5.1.2 Mechanical effect | In order to break down tough layers of dirt, additional mechanical |
| effect may be required. Special wash brushes offer this supple- |
| mentary effect that cuts through dirt (especially by car washing). |
11