Operating Instructions | Nilfisk-Advance America P 130.1, P 150.1

Preparation EN

•Never try to clean clothes or footwear on yourself or other persons.

•Do not let children or people who have not read the instruction manual operate the machine.

•Never use the machine in an environment where there could be a danger of explosion. If any doubt arises, please contact the local authorities.

•It is not allowed to clean asbestos-containing surfaces with high pressure.

Safety devices

Locking device on spray gun

The spray gun features a locking device (6b). When the pawl is activated, the spray gun cannot be ope- rated.

Thermal sensor:

A thermal sensor protects the motor against over- loading. The machine will restart after a few minutes when the thermal sensor has cooled.

Pressure safety device

An integrated hydraulic safety valve protects the system from excessive pressure

2.0Operating Instructions

2.1Operating facilities

•Start-/stop rotary switch (2).

•Spray gun (6) with trigger (6a) and locking device (6b).

•Dosing regulator for detergents (12).

•Regulation of pressure / water volume (14). (not available on model B)

2.2 Connection

1.PRO 130/150/160: Attach the high pressure hose

(5) to the connection for high pressure hose (3). Only use one extension hose of max. 7 m.

PRO 130/150/160 X-TRA: Unwind the high pres- sure hose completely.

2.Attach the nipple of the high pressure hose to the spray gun quick coupling.

3.Mount the nozzle or any other equipment you want to use.

4.Connect the machine to the water and power supplies.

Operating Instructions EN

2.3 Start

1.Check that the machine is in vertical position.

2.Activate the trigger of the spray gun (6a) and let the water run out until any air has escaped from the inlet hose.

3.Turn the start/stop switch (2) to pos. I.

2.4 Operation

1. Always hold the spray lance ﬁrmly with both hands! The spray lance is affected by a longitudinal thrust of up to 16.4 N when the high pressure washer is operated.

2.Point the nozzle at the ground!

3.Activate the trigger of the spray gun (6a).

4.Always adjust the distance and thus the pres- sure of the nozzle to the surface which is to be cleaned. NOTE: The pressure can be regulated on the TORNADO® PR nozzle or the button for regulation of pressure / water volume (14).

High pressure

Low pressure

NOTE: Do not cover the machine during operation. If the machine is left or not used for 5 minutes, it must be switched off on the start/stop switch (2) pos. O.

Operation with detergents

Application of detergents is NOT possible if an extension hose is applied.

1.Fill the container with a detergent.

2.Mount the TORNADO® PR nozzle and adjust it to low pressure (see section 2.4.4).

3.Adjust the dosing regulator (12) to the required volume of detergent (0-5%).

4.Apply the detergent from below and upwards.

5.Let the detergent act for the time stated on the packing of the detergent and ﬂush with pure water.

P 130.1, P 150.1 specifications

Nilfisk-Advance America P 150.1 and P 130.1 are two of the leading high-pressure cleaners designed for demanding cleaning tasks in both commercial and industrial settings. These machines embody efficiency, durability, and advanced cleaning technology, making them ideal for various applications.

The Nilfisk P 150.1 model boasts a robust 3-phase motor that delivers a high flow rate of up to 650 liters per hour and generates a pressure of 150 bar, while the P 130.1 model features a single-phase motor with a maximum pressure of 130 bar and a flow rate of 500 liters per hour. This versatility makes both models suitable for cleaning a wide array of surfaces, from vehicles to industrial equipment.

One of the standout features of the Nilfisk P series is the advanced pump system that ensures efficient water usage while delivering powerful cleaning performance. The aluminum pump head with brass connectors not only adds durability but also prevents corrosion and wear over time.

Both models utilize the latest technology in pressure cleaning with the inclusion of a thermal protection system. This feature prevents overheating by automatically shutting down the machine when it reaches a certain temperature, thus enhancing the longevity of the pump and motor.

User-friendliness is at the forefront of Nilfisk's design philosophy. Both P 150.1 and P 130.1 are equipped with ergonomic handles and wheels, providing ease of transportation and maneuvering in tight spaces. The integrated storage options for hoses, nozzles, and accessories further enhance convenience for the user.

Moreover, Nilfisk's innovative nozzle technology, which includes adjustable nozzles, allows users to easily switch between high-pressure jets for stubborn stains and low-pressure jets for gentle cleaning. This adaptability makes it possible to tackle different cleaning tasks without needing to change equipment.

Both the P 150.1 and P 130.1 are designed with environmental considerations in mind. They operate efficiently, minimizing water consumption while maximizing cleaning effectiveness, contributing to sustainability efforts in industrial and commercial cleaning.

In summary, the Nilfisk-Advance America P 150.1 and P 130.1 offer exceptional performance, durability, and user-friendly features, making them top choices for professionals seeking powerful and reliable cleaning solutions. With advanced technology, ergonomic design, and effective water management, these high-pressure cleaners are set to meet the challenges of various cleaning applications effectively.