Nilfisk-Advance America P 130.1, P 150.1 user manual Trouble shooting guide

Page 9

8.0 Trouble shooting guide

EN

 

 

To avoid unnecessary disappointments, you should check the following before contacting the Nilfisk service organisation:

Symptom

Cause

Recommended action

Machine refuses to start

Machine not plugged in

Plug in machine.

 

Defective socket

Try another socket.

 

Fuse has blown

Replace fuse. Switch off other machines.

 

Defective extension cable

Try without the extension cable.

 

 

 

Machine stops

Fuse has blown

Replace fuse. Switch off other machines.

 

Incorrect mains voltage

Check that the mains voltage corresponds to

 

 

specification on the model tag.

 

Thermal sensor activated

Wait - the machine will start after a few

 

 

minutes.

 

 

WARNING! The trigger of the spray gun

 

 

must not be activated.

 

 

 

Fuse blows

Fuse too small

Change to an installation higher than the

 

 

amp. consumption of the machine.

 

 

You may try without the extension cable.

 

 

 

Machine pulsating

Air in inlet hose/pump

Allow machine to run with open trigger until

 

 

regular working pressure resumes.

 

Inadequate supply of

Check that the water supply corresponds to

 

mains water

specifications required (see model tag)

 

 

NB! Avoid using long, thin hoses (min 1/2")

 

Nozzle partially blocked

Clean the nozzle (see section 4.1)

 

Water filter blocked

Clean the filter (see section 4.2)

 

Hose kinked

Straighten out hose.

 

High pressure hoses too long

Disconnect high pressure extension hoses

 

 

and retry. (Extension hose max. 7 m).

 

 

 

Machine often starts

Pump/spray gun is

Contact your nearest Nilfisk Service Centre.

and stops by itself

leaking

 

 

 

 

Machine starts, but

Pump/hoses or accessory

Wait for pump/hoses or accessory to thaw.

no water comes out

frozen

 

 

No water supply

Connect inlet water.

 

Water filter blocked

Clean the filter (see section 4.2)

 

Nozzle blocked

Clean the nozzle (see section 4.1)

 

 

 

Pump pressure drops

Button for regulation of

Adjust the button to correct working pressure.

 

pressure / water volume not

 

 

correctly adjusted

 

 

(not available on model B)

 

 

 

 

In case problems other than the above occur, please contact your local Nilfisk distributor.

UK:

Customer Services at Penrith - 01768 868995

9

Image 9
Contents 128303204 c Copyright 2010 Nilfisk, Division of Nilfisk-Advance A/S Contents Fields of application ENModel survey Preparation Operating Instructions Suction mode Regulation of pressure / water volumeOperating Instructions EN End of operationStandard Equipment AccessoriesExtra Equipment DetergentsQuestions and answers Maintenance Recycling the washerCleaning of nozzle Cleaning of water inlet filterTrouble shooting guide Warranty conditions Page Head Quarter

P 130.1, P 150.1 specifications

Nilfisk-Advance America P 150.1 and P 130.1 are two of the leading high-pressure cleaners designed for demanding cleaning tasks in both commercial and industrial settings. These machines embody efficiency, durability, and advanced cleaning technology, making them ideal for various applications.

The Nilfisk P 150.1 model boasts a robust 3-phase motor that delivers a high flow rate of up to 650 liters per hour and generates a pressure of 150 bar, while the P 130.1 model features a single-phase motor with a maximum pressure of 130 bar and a flow rate of 500 liters per hour. This versatility makes both models suitable for cleaning a wide array of surfaces, from vehicles to industrial equipment.

One of the standout features of the Nilfisk P series is the advanced pump system that ensures efficient water usage while delivering powerful cleaning performance. The aluminum pump head with brass connectors not only adds durability but also prevents corrosion and wear over time.

Both models utilize the latest technology in pressure cleaning with the inclusion of a thermal protection system. This feature prevents overheating by automatically shutting down the machine when it reaches a certain temperature, thus enhancing the longevity of the pump and motor.

User-friendliness is at the forefront of Nilfisk's design philosophy. Both P 150.1 and P 130.1 are equipped with ergonomic handles and wheels, providing ease of transportation and maneuvering in tight spaces. The integrated storage options for hoses, nozzles, and accessories further enhance convenience for the user.

Moreover, Nilfisk's innovative nozzle technology, which includes adjustable nozzles, allows users to easily switch between high-pressure jets for stubborn stains and low-pressure jets for gentle cleaning. This adaptability makes it possible to tackle different cleaning tasks without needing to change equipment.

Both the P 150.1 and P 130.1 are designed with environmental considerations in mind. They operate efficiently, minimizing water consumption while maximizing cleaning effectiveness, contributing to sustainability efforts in industrial and commercial cleaning.

In summary, the Nilfisk-Advance America P 150.1 and P 130.1 offer exceptional performance, durability, and user-friendly features, making them top choices for professionals seeking powerful and reliable cleaning solutions. With advanced technology, ergonomic design, and effective water management, these high-pressure cleaners are set to meet the challenges of various cleaning applications effectively.