Nilfisk-Advance America HSC 585 operating instructions Inspection, Cleaning Solutions, Maintenance

Page 3

INSPECTION:

Carefully unpack and inspect your HSC 585-MULTI for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

Select a proper pre-spray for the surface to be cleaned, and apply the pre-spray. Use a neutral pH rinse or detergent (6 to 9 pH) in the HSC 585 to prevent premature wear of the pump, seals and other components. Powdered chemicals are not recommended.

MAINTENANCE:

For optimum performance, flush the machine with clear water at the end of each working day. Once a month, minimum, run a flushing compound through the machine to break up any mineral or chemical build-up that may have formed in the lines, the pumps, or the heater. The vacuum motor, pump motor, and the pump do not require any scheduled maintenance; however, the vacuum motors may require replacement brushes after 1000 - 1500 hours, and the high pressure pump and unloader valve may require rebuild kits after 500 -1000 hours (refer to machine part list for numbers). Clean the body with an all purpose detergent, and protect it with an automobile interior polish. Lubricate the wheels, castors, and quick disconnects with an all- purpose silicone spray.

NOTE: to remove the complete reel with hoses from the machine, pull the vacuum hose loose from the hose barb on the front of the tank, and push the short piece of vacuum hose into the center of the hose spool. Disconnect the solution hose quick coupling. Grasp the spool from either side, and lift it off the machine.

NOTE: before servicing any component in the base cabinet, remove the hoses and spool before opening the tanks.

Record the serial number and model of your new extractor here:

Model: HSC 585-Multi_ Serial Number: __________________

Purchase Date:_____________

Write the name and phone number of your distributor:

_____________________________________

_____________________________________

11600205211REVA

-3-

Page 2 Page 4
Image 3
Page 2 Page 4
Contents HSC 585 Multi Extractor To reduce the risk of fire, electric shock, or injury Important Safety InstructionsCleaning Solutions MaintenanceInspection Switch Plate Know Your MachineHSC 585 Multi Operation LOW Pressure and Heat LOW Pressure and Heat AUTOMATIC-FILL Instructions Using the AUTOMATIC-FILL AND/OR AUTOMATIC-DUMPAUTOMATIC-DUMP Instructions HSC 585 Multi Always USE only Original Nilfisk Parts on Your HSC 585 Multi Miscellaneous Parts and KitsMini Turbo Hard Surface Tool AccessoriesTurbo Hard Surface Tool Hard Surface Combo ToolMX 585 Multi

HSC 585 specifications

The Nilfisk-Advance America HSC 585 is a powerful and versatile commercial scrubber that has been designed to enhance cleaning efficiency in various environments. This machine stands out for its innovative technology and user-friendly features, making it an excellent choice for those seeking a reliable solution for floor maintenance.

One of the main features of the HSC 585 is its compact design. This allows for easy maneuverability in tight spaces, making it suitable for use in crowded areas such as retail stores, airports, and educational institutions. Despite its smaller size, the machine does not compromise on cleaning power. It boasts a highly efficient motor and robust scrub brushes that can tackle even the toughest dirt and grime.

The HSC 585 operates with a large-capacity water tank, which reduces the need for frequent refills during cleaning operations. This is especially beneficial for facilities that require extensive floor cleaning sessions. Additionally, the scrubber features an advanced vacuum system that ensures effective water recovery, leaving floors not only clean but also dry and safe for immediate use.

In terms of technology, the Nilfisk-Advance HSC 585 incorporates cutting-edge scrubber system controls that optimize cleaning performance. The intuitive control panel is designed for ease of use, enabling operators to adjust settings quickly according to the specific floor type and cleaning requirements. This feature enhances productivity by minimizing the time spent on setup and adjustments.

Ergonomics is a crucial aspect of the HSC 585’s design. The machine is equipped with comfortable grip handles and adjustable features to accommodate various user heights, reducing fatigue during operation. This is particularly important for staff who may spend long hours using the machine.

Moreover, the Nilfisk-Advance HSC 585 is built with durability in mind. Its high-quality materials ensure that the machine can withstand the rigors of daily use. This contributes to lower maintenance costs and extended lifecycle, making it a smart investment for any cleaning operation.

In conclusion, the Nilfisk-Advance America HSC 585 is a compact yet powerful scrubber ideal for diverse commercial environments. Its unique features, advanced technology, and emphasis on ergonomics and durability make it an outstanding choice for efficient and effective floor cleaning. This scrubber exemplifies the commitment to quality and performance that Nilfisk-Advance represents in the cleaning industry.
Top Page Image Contents