LOW Pressure and Heat

HIGH PRESSURE continued

water to a clear, solid stream. Priming may take 20 - 60 seconds, or even longer sometimes, and it will require a full solution tank. When the pump is primed, let off the Power Prime Pedal, and turn off the pump and the vacuum. Then press the Power Prime Pedal once again, for a moment, to release the line pressure; you will hear a ‘swoosh’ of air as the back pressure in the lines is released. The pump will need to be primed anytime air gets into it -- try not to let the pump run dry. Proceed to the next step.

7.Add defoamer to the recovery tank.

8.Attach the solution spray hose to the solution quick disconnect. Attach the vacuum hose to the hose barb on the front of the recovery tank. Pull the hoses out from the reel. Attach the other ends of the hoses to the cleaning tool.

9.If you choose to use the automatic pump-out feature, MAKE SURE THE CAP IS REMOVED FROM THE HOSE CONNECTION ON THE BACK OF THE MACHINE BEFORE YOU TURN THE SWITCH ON. This pump will run continuously once you turn it on, and if it tries to pump out water, but the cap is still on the hose fitting, the pump may be damaged.

10.Turn on the vacuum (3) and turn on the dump pump (if you chose to use this feature) (5). Begin spraying. If you are not using the auto-fill or auto-dump features, turn off the pump and vacuum when the solution tank gets low; fill the solution tank, and empty and clean the recovery tank. If you use the auto-fill and/or auto-dump features, you will not need to stop working to fill and/or empty your tanks.

11.When the job is finished, turn off the automatic pump-out pump turn and turn off the water source, if they were employed. Use the vacuum hose to suck the remaining solution from the holding tank into the recovery tank.

13.Run a few gallons of clean water through the system. Completely empty the recovery tank by placing the drain hose over a floor drain, toilet, or tub, and removing the cap. You can clean the tank at this time with clean water. When the tank is empty, cap the drain hose and place it back in the hook and loop holder.

Disconnect the hoses from the cleaning tool, and reel them up onto the hose spool.

14.Unplug the power cord. Clean the machine and the tool.

CAUTION: if foam or water comes out the vacuum exhaust, turn the machine off immediately

1Before each use, inspect the machine, hoses, and cleaning tools for cleanliness and completeness. Make sure hoses are in good condition and the spray nozzle(s) is tight.

REFER TO THE AUTO-FILL AND AUTO-DUMP INSTRUCTIONS ON THE FOLLOWING PAGE

2.If you choose to use the automatic pump-out feature, connect the dump hose to brass hose fitting on the back of the machine, and place the open end of the hose in a drain. NOTE: NEVER TURN ON THE PUMP OUT PUMP UNTIL YOU HAVE REMOVED THE CAP FROM THE HOSE CONNECTOR ON THE REAR OF THE MACHINE. Make sure the drain hose on the back of the vacuum tank is closed and the lid is tight on the recovery tank. If you are not going to use the auto pump-out option, just make sure the brass cap is on the hose connector on the rear of the machine.

continue on next page

HSC 585 specifications

The Nilfisk-Advance America HSC 585 is a powerful and versatile commercial scrubber that has been designed to enhance cleaning efficiency in various environments. This machine stands out for its innovative technology and user-friendly features, making it an excellent choice for those seeking a reliable solution for floor maintenance.

One of the main features of the HSC 585 is its compact design. This allows for easy maneuverability in tight spaces, making it suitable for use in crowded areas such as retail stores, airports, and educational institutions. Despite its smaller size, the machine does not compromise on cleaning power. It boasts a highly efficient motor and robust scrub brushes that can tackle even the toughest dirt and grime.

The HSC 585 operates with a large-capacity water tank, which reduces the need for frequent refills during cleaning operations. This is especially beneficial for facilities that require extensive floor cleaning sessions. Additionally, the scrubber features an advanced vacuum system that ensures effective water recovery, leaving floors not only clean but also dry and safe for immediate use.

In terms of technology, the Nilfisk-Advance HSC 585 incorporates cutting-edge scrubber system controls that optimize cleaning performance. The intuitive control panel is designed for ease of use, enabling operators to adjust settings quickly according to the specific floor type and cleaning requirements. This feature enhances productivity by minimizing the time spent on setup and adjustments.

Ergonomics is a crucial aspect of the HSC 585’s design. The machine is equipped with comfortable grip handles and adjustable features to accommodate various user heights, reducing fatigue during operation. This is particularly important for staff who may spend long hours using the machine.

Moreover, the Nilfisk-Advance HSC 585 is built with durability in mind. Its high-quality materials ensure that the machine can withstand the rigors of daily use. This contributes to lower maintenance costs and extended lifecycle, making it a smart investment for any cleaning operation.

In conclusion, the Nilfisk-Advance America HSC 585 is a compact yet powerful scrubber ideal for diverse commercial environments. Its unique features, advanced technology, and emphasis on ergonomics and durability make it an outstanding choice for efficient and effective floor cleaning. This scrubber exemplifies the commitment to quality and performance that Nilfisk-Advance represents in the cleaning industry.