Nilfisk-Advance America C 120.5 X-TRA, C 120.3, C 125.3 user manual After using your pressure washer

Page 11

6 After using your pressure washer

6.1 Storing the washer

The machine should be sto-

 

red in a frost-free room!

 

Pump, hose and accessories

 

should always be emptied of

 

water prior to storing as follows:

 

1. Stop the machine (turn

 

the start/stop switch (1) to

 

position"O") and detach wa-

 

ter hose and accessory.

 

2. Restart the machine and

 

activate the trigger. Let the

 

machine run until no more

 

water runs through the spray

 

gun.

3.Stop the machine, unplug and wind up hose and cable.

4.Place spray handle, nozzles and other accessories in the holders of the machine.

Should the machine by mistake be frozen, it will be necessary to check it for damage.

NEVER START-UP A FROZEN MACHINE.

Frost damages are not covered by the guarantee!

6.2Winding up of electric cable and high pressure hose

C 120.3

C 125.3

C 120.3

C 125.3

C 120.5 X-TRA

C 120.5 X-TRA

To avoid accidents, the electric cable and the high pressure hose should always be winded carefully up.

Wind up the electric cable and the high pressure hose on the appropriate hooks. Built-in clip for good holding.

The high pressure washer comes in two models: A) with hook for storage of high pres- sure hose (14) - B) with a hose reel (13), where the hose is pushed into the reel and after- wards winded up.

11

Image 11
Contents Nilfisk C Nilfisk C 120.5 X-TRA Copyright 2010 Nilfisk, Division of Nilfisk-Advance A/S Index Safety Precautions and WarningsSymbols used to mark in- structions Or approved by the manufac- turer Mains power connectionDescription Mounting of trolley handle and hose hook Before you start using your pressure washerConnection of high pres- sure hose Operating your pressure washerMounting of high pres- sure hose IMPORTANT! Only use water without any Point the nozzle at the groundMechanical effect Fields of application and working methodsPressure regulation on the Tornado PR- nozzle GeneralTypical fields of application Task Accessories ‘Click Cleaning method Clean’Never START-UP a Frozen Machine After using your pressure washerImportant The bearing capacity of the wall hook Storage of accessoriesWall storage Cleaning of water inlet filter Cleaning of nozzle MaintenanceGreasing of couplings Cleaning of machineVents Trouble-shooting Further information Warranty conditionsAccessories EU Declaration of Conformity Page Head Quarter

C 120.5 X-TRA, C 125.3, C 120.3 specifications

Nilfisk-Advance America is renowned for its high-quality cleaning equipment, and among its impressive lineup are the C 125.3, C 120.3, and C 120.5 X-TRA pressure washers. These models are designed to deliver exceptional cleaning performance for both residential and commercial applications, making them ideal for tackling tough cleaning tasks with ease and efficiency.

The C 125.3 pressure washer stands out with its robust 125 bar working pressure, offering a powerful cleaning solution for driveways, patios, and outdoor furniture. This model is equipped with a durable aluminum pump that ensures longevity and reliability during use. The ergonomic design of the C 125.3 makes it easy to maneuver, while its compact size allows for convenient storage.

In addition to its powerful motor, the C 125.3 features a variety of accessories including a high-pressure hose, spray lance, and nozzles that allow users to customize their cleaning experience. The quick-connect system enables easy attachment and detachment of accessories, enhancing the overall usability.

Similarly, the C 120.3 model maintains a balance of performance and versatility, operating at a pressure of 120 bar. This electric pressure washer is perfect for light to medium cleaning tasks and is designed with user-friendly features, including an integrated detergent tank for straightforward application of cleaning agents. Its lightweight construction makes it easy to transport, while the onboard storage for tools and accessories ensures everything is readily accessible.

The C 120.5 X-TRA takes it a step further with enhanced features and technology. With an improved design and a powerful motor, the C 120.5 X-TRA maximizes efficiency and effectiveness during operation. It comes equipped with a metal pump for increased durability and the ability to withstand high working pressures. This model also offers variable pressure control, allowing users to adjust the intensity of the spray for different surfaces.

All three models prioritize user comfort, featuring ergonomic handles and built-in wheels for easy movement. They also utilize Nilfiskā€™s innovative technology, such as the Automatic Stop System, which turns off the motor automatically when the trigger is not engaged, conserving energy and prolonging pump life.

In summary, the Nilfisk-Advance America C 125.3, C 120.3, and C 120.5 X-TRA pressure washers embody a blend of power, versatility, and convenience. Equipped with advanced technology and user-friendly features, these models cater to diverse cleaning needs, making them reliable choices for both homeowners and professionals alike.